Mark Levinson N.52

186300 lei/bucata

Sau 23287.5 lei / luna in 8 rate

Garantie 24 luni

* Preţul conţine TVA şi taxa timbru verde
SKU: 13616. Category: . Tag: .

„The Nº52 features seven analog inputs – three balanced XLR and four unbalanced RCA – as well as a dedicated phono input configurable for moving-magnet (MM) or moving-coil (MC) operation. Two sets of pre-outs are duplicated in both XLR and RCA jacks, while an additional auxiliary pair of XLR and RCA outputs is configurable, for fixed or variable output with independent source selection. This function allows the auxiliary output to function as a third pre-out, a pass-through full-range subwoofer output or a record output.
The Nº52 comes with a unity-gain SSP mode that integrates the connected sources into a home theater system while still maintaining optimal and independent stereo operation for music. System controls include Ethernet, Mark Levinson’s proprietary ML Net, and 12V trigger and IR control ports, as well as a USB connector that can facilitate software updates. Additionally, the included remote control also operates both the Nº52 and other connected Mark Levinson components.

Product Description

  • DESCRIPTIONReference Dual-Monaural Preamplifier
  • PHONO INPUTSInput Overload (phono): >100mV @1kHz (40dB gain); >10mV @1kHz (60dB gain)
  • COMMUNICATION AND CONTROLVolume Control Range: 80.0dB
  • FREQUENCY RESPONSE10Hz – 40kHz (±0.2dB)
  • FREQUENCY RESPONSE (PHONO)±1dB (RIAA response)
  • INPUT IMPEDANCEInput Impedance (line-level): 100k ohms — Input Impedance (phono): Resistive: 3.3Ω, 5.0Ω, 7.7Ω, 10Ω, 33Ω, 50Ω, 77Ω, 100Ω, 330Ω, 47kΩ, (user-selectable) Capacitive: 50pF, 100pF, 150pF, 200pF, 250pF, 300pF, 350pF, 0.01μF (user-selectable)
  • ANALOG AUDIO INPUTS3 balanced (female XLR) stereo inputs; 4 single-ended (Mark Levinson-RCA) stereo inputs
  • ANALOG AUDIO OUTPUTS1 balanced (male XLR) stereo main output; 1 single-ended (Mark Levinson-RCA) stereo main output; 2 single-ended (Mark Levinson-RCA) stereo record outputs
  • MAXIMUM OUTPUT LEVEL16V – balanced (XLR) connectors; 8V – unbalanced (RCA) connectors
  • SIGNAL-TO-NOISE RATIOResidual Noise: < 120dB (20Hz – 20kHz, input terminated,balanced)
  • GAINGain (line-level stage): 0dB, +6dB, +12dB, or +18dB (user-selectable) — Gain (phono stage): +40dB, +60dB @1kHz (user-selectable) — Gain Resolution: 1.0dB increments up to 23.0dB on display (–57dB to –80dB); 0.1dB increments above 23.0dB on display (0dB to –57dB)
  • OUTPUT IMPEDANCE20 ohms – balanced (XLR) connectors; 10 ohms – unbalanced (RCA) connectors
  • POWER REQUIREMENTSOperating Voltage: 100V – 240VAC, 50Hz/60Hz
  • HEIGHT8.75″ (22.2 cm) – Control = 3.25″ (8.2 cm); Audio = 5.5″ (14 cm)
  • WIDTH17.25″ (43.8 cm)
  • DEPTH13″ (33 cm)
  • WEIGHT60 lb (27 kg) Control = 25 lb (11 kg); Audio = 35 lb (16 kg)
  • POWER CONSUMPTION65W (maximum)

Reviews

There are no reviews yet, would you like to submit yours?

Be the first to review “Mark Levinson N.52”

*

Top