Paradigm PW Amp 

 Paradigm PW Amp

PW AMP DATASHEET

1.98M

Paradigm PW Link

Paradigm PW Link

PW LINK DATASHEET

2.94M

• Frequency Response - 45–23,000 Hz ±2dB
• Amplifier Class-D Amp; 200W Peak (1 x 100W woofer, 2 x 50W tweeters)..
• Room Correction - ARC (Anthem Room Correction) with included calibrated microphone
• High Frequency Driver -Two 0.94” x 1” (2.4cm x 2.5cm) Folded Motion Transducers with 2.8” x 1.25” (7.1cm x 3.2cm) diaphragm.
• Low Frequency Driver -5” (12.7cm) anodized aluminum cone with extended throw drive assembly. Non-resonant asymmetrical chamber format.
• Crossover Frequency   6,000 Hz
• Components  DSP based preamplifier
• Inputs-Wi-Fi, Analog 3.5mm, Ethernet 10/100, AC Power
• Audio Controls  Side mounted controls, Left/Stereo/Right position switch
• Wireless band 2.4 GHz and 5.0 GHz; 802.11 g/n
• Wireless Input-Apple AirPlay, DTS Play-Fi
• Power Draw-Max: 170 watts Idle: 10 watts Standby: 6 watts
• Weight-7.5lbs. (3.4kg) each
• Dimensions  -10.12" (25.7cm) Height 5.6" (14.2cm) Width 6.8" (17.3cm) Depth

• DESIGN In-Ear Headphones with Built-In Microphone & Smart Phone Remote that are voiced matched to Paradigm's ultimate high-end Signature Series speakers.
• FREQUENCY RESPONSE ON-AXIS 8 Hz — 19kHz
• HIGH FREQUENCY DRIVER High Frequency Driver
• SENSITIVITY ROOM / ANECHOIC 105 dB /
• FINISHES Black or White
• COMPONENTS Built-in microphone with smart phone functionality. Includes small, medium and large ear tips.

• DESIGN In-Ear Headphones with Built-In Microphone & Apple Approved Remote with volume control that are voiced matched to Paradigm's ultimate high-end Signature Collection.
• FREQUENCY RESPONSE ON-AXIS 8 Hz — 19kHz
• HIGH FREQUENCY DRIVER 8-mm super-neodymium
• SENSITIVITY ROOM / ANECHOIC 105 dB /
• FINISHES Black
• COMPONENTS Built-in microphone with smart phone functionality. Includes small, medium and large ear tips.

• DESIGN In-Ear Headphones with Built-In Microphone & Smart Phone Remote that are voiced matched to Paradigm's high-end Studio Series speakers.
• FREQUENCY RESPONSE ON-AXIS 10 Hz — 19kHz
• HIGH FREQUENCY DRIVER 8-mm super-neodymium
• SENSITIVITY ROOM / ANECHOIC 104 dB /
• FINISHES Black or White
• COMPONENTS Built-in microphone with smart phone functionality. Includes small, medium and large ear tips.

• Digital (S/PDIF) 6 x S/PDIF: - 1 x coaxial BNC - up to 24bits/192kHz - 1 x coaxial RCA - up to 24bits/192kHz - 3 x optical TOSlink - up to 24bits/96kHz - 1 x front panel mini-TOSLINK - up to 24/96kHz
• Analogue 2 x RCA, 1 x front panel 3.5mm jack (combined optical), 1 x DIN
• USB 1 x front panel Type A socket (also used for iPod)
• Input Sensitivity 270mV at 47kΩ
• UPnP Wi-Fi (802.11 g or n at 2.4GHz), F type (plus PAL adapter)
• Antenna 802.11 b/g at 2.4GHz
• Other Spotify Connect, Bluetooth (SBC, AAC and aptX Classic, aptX Low Latency)

• Digital (S/PDIF) 1 x BNC (75Ω)
• Analogue Speaker output, preamp output (RCA)
• Power Output 80W per channel into 8Ω, 120W per channel into 4Ω (0.1% THD both channel driven)
• Frequency Response 10Hz-20kHz, +0.1/-0.5dB
• Signal-to-Noise Ratio 85dB A-WTD ref 1W 8 Ω
• Output Impedance 22Ω
• Load Impedance 10kΩ min
• Sub Output 1 x RCA pair
• Headphone Output 1 x 3.5mm jack

• Remote Control Infra Red (RC5)
• Remote Input 3.5mm jack on rear (RC5)
• Remote Output 3.5mm jack on rear (RC5)
• Updates 1 x USB Type Mini-B

• Audio Formats WAV (up to 24bit/192kHz) AIFF (up to 24bit/192kHz) FLAC (up to 24bit/192kHz) ALAC (up to 24bit/96kHz) WMA (up to 16bit/48kHz) must be WMA 9.2 Ogg Vorbis (up to 16bit/48kHz) M4a (CBR and VBR up to 320kbit/s) MP3 (CBR and VBR up to 320kbit/s) Playlists (M3U, PLS)
• Internet Radio Provider vTuner 5* full service
• Internet Radio formats Windows Media-formatted content, MP3, ACC, Ogg Vorbis streams and MMS
• Multiroom Master: Will stream WAV, FLAC and AIFF (up to 24bit/48kHz), ALAC (up to 16bit/44.1kHz), AAC and MP3 (up to 16bit/48kHz) files only as MP3 320kbps quality.
• DAB Tuning Range Band III and L Band, F Type
• FM Tuning Range 87.5 - 108MHz, F Type

• Front Panel Volume control, logo touch-sensitive mute function and nine button matrix
• Handheld Remote handset included and optional Naim app for iOS and Android.

• Supply Voltage 100V, 115V, 230V; 50 or 60Hz
• Power Consumption 400VA (max)

• Amplification External power amplifier
• Other Power-Line, Hi-Line, WA5 antenna

• Dimensions (HxWxD) 87 x 432 x 314 mm
• Weight 12.8 kg
• Supplied with Uniti Remote Control

AUDIO INPUTS

• 2 x Optical TOSLink (up to 24bit/96kHz)
• 1 x Coaxial RCA (up to 24bit/192kHz, DoP 64Fs)
• 1 x HDMI ARC (optional)

• USB     2 x USB Type A Socket (front and rear)
• Streaming -  Chromecast Built-In, Apple AirPlay, TIDAL, Spotify® Connect, Bluetooth (AptX HD), Internet Radio, UPnP™ (hi-res streaming), Roon Ready

CONNECTIVITY

• Network Ethernet (10/100Mbps), WiFi (802.11 b/g/n/ac with internal antennae)

UPTADES

• Update your system wirelessly via the Naim app.

UPGRADES

FORMATS

• Audio FormatsWAV - up to 32bits/384kHz FLAC and AIFF - up to 24bit/384kHz ALAC (Apple Lossless) - up to 24bit/384kHz MP3 - up to 48kHz, 320kbit (16 bit) AAC - up to 48kHz, 320kbit (16 bit) OGG and WMA - up to 48kHz (16 bit) DSD - 64 and 128Fs
• Notes: Gapless playback supported on all formats. Internet Radio Formats: Windows Media-formatted content, MP3, ACC, OGG Vorbis streams and MMS

POWER

• Amplifier Output -40W per channel into 8 ohms
• Mains Supply 100V, 115V, 230V; 50 or 60Hz

USER CONTROL

• Handheld  Zigbee RF4CE
• App Control Naim App for iOS and Android
• Front Panel 5" colour TFT display and rotary volume control with proximity sensor and four buttons

PHYSICAL

• Dimensions 95mm x 245mm x 265mm (HxWxD)
• Weight - 7kg
• Finishes -Brushed and anodised aluminium
• Supplied with Remote control, Power-Line Lite mains cable (UK denominations only), cleaning cloth and quick start guide.

AUDIO INPUTS

• Analogue Inputs - 1 x 4-pin DIN
• Input Impedance - 18kΩ

AUDIO OUTPUTS

• Gain - +29dB
• Frequency Response - -3dB at 3Hz - 50kHz
• Power Outputs - Naim pre-amplifier

SPEAKER OUTPUTS

• Speaker Outputs - L and R, 4mm “banana” sockets
• Power Output - 70W/channel, 8Ω
• Transient - 300VA

POWER

• Mains Supply - 100V, 115V, 230V; 50 or 60Hz
• Power Consumption (quiescent) - 11VA

Physical

• Dimensions (HxWxD) 87 x 432 x 314 mm
• Weight 11.6 kg
• Shipping Dimensions 240 x 590 x 500 mm
• Supplied with SNAIC
• Shipping Weight 14.2kg

FINISH

• Front - Brushed and black anodised
• Case - Black powder coated

AUDIO INPUTS

• Input Level Suitable for 2V sources (0.5 to 5.0V)
• Input Sensitivity 130mV
• Analogue Inputs 4 x DIN/RCA pair, 1 x RCA pair, 1 x DIN (for Naim phono amplifier)

USER CONTROL INTERFACE

• Front Panel Volume control and front panel buttons

AUDIO OUTPUTS

• Line Outputs Fixed (level) AV (DIN), HDD (DIN) 130mV, 600Ω
• Line Outputs Variable (level) Pre-amp (DIN), sub (RCA pair), 775mV, <50Ω
• Power Outputs +24V for Naim phono amplifier
• Headphone outputs ¼ inch (6.35mm) TRS Socket

SPEAKER OUTPUTS

• Power Output 70W per channel into 8Ω, 100W per channel into 4Ω

UPGRADES

• Power Supply FlatCap, HiCap or Supercap

CONNECTIVITY

• Remote Control Infra-Red (RC5)
• Remote Input 1 x 3.5mm jack on rear
• Updates 1 x USB mini-B

POWER

• Mains Supply 100V, 115V, 230V; 50 or 60Hz
• Power Consumption (quiescent) 16VA
• Power Consumption (maximum) 350VA

PHYSICAL

• Dimensions 70 x 432 x 314 (H x W x D)
• Weight 8.4kg
• Supplied With NARCOM-4 remote control

OTHER

• Suggested System CD5XS CD player or ND5 XS network player

FINISH

• Front Brushed and black anodised aluminium
• Case Black powder coated aluminium

AUDIO INPUTS

• Input Level Suitable for 2V sources (0.5 to 5.0V)
• Input Sensitivity 170mV
• Analogue Inputs 2 x DIN/RCA pair, 2 x RCA pair

USER CONTROL INTERFACE

• Front Panel Volume control and front panel buttons

AUDIO OUTPUTS

• Line Outputs Fixed (level) HDD (RCA pair) 170mV, 470 Ω
• Headphone outputs ¼ inch (6.35mm) TRS Socket

SPEAKER OUTPUTS

• Power Output 60W per channel into 8ohms, 90W per channel into 4ohms

CONNECTIVITY

• Remote Control Infra-Red (RC5)

POWER

• Mains Supply 100V, 115V, 230V; 50 or 60Hz
• Power Consumption (quiescent) 19VA
• Power Consumption (maximum) 300VA

PHYSICAL

• Dimensions 70 x 432 x 314 (H x W x D)
• Weight 6.4kg
• Supplied With NARCOM-4 remote control

OTHER

• Suggested System CD5si

FINISH

• Front Black powder coated aluminium
• Case Black powder coated aluminium

• Frequency Response - 40–25,000 Hz ±3dB
• Dispersion - 80° x 80°
• Sensitivity - 92 dB/2.83 volts/meter
• Nominal Impedance - 4 Ohms. Compatible with 4, 6 or 8 ohm rated amplifiers.
• Recommended Amplifier Power - 20-300 watts per channel
• Crossover Frequency - 500 & 2,600 Hz
• Crossover Components - Precision Vojtko™ with custom air core coil and low DCR steel laminate inductors. Polyester film capacitors in series and low DF electrolytic capacitors in parallel
• High Frequency Transducer - 1" × 1.4" (2.6cm × 3.6cm) Folded Motion Transducer with 5.25" × 1.75" (13.3cm × 4.4cm) diaphragm
• Mid Frequency Driver - 5.5" (14cm) aluminum cone in a non-resonant asymmetrical chamber format. Cast polymer basket. Rigid structured dustcap reduces cone break-up.
• Low Frequency Driver - Two 6.5" (16.5cm) aluminum cone woofers in a non-resonant asymmetrical chamber format. Cast polymer basket. Rigid structured dust caps reduce cone break-up.
• Binding Posts - Custom 5-way bi-wire tool-less binding posts
• Spikes - Included MiniETC™ Spikes
• Weight - 49lbs. (22.2kg) each
• Overall Dimensions(HxWxD) - 42.5 x 7.6 x 12.8 (107.9cm x 19.2cm x 32.6cm)

• Frequency Response - 46–25,000 Hz ±3dB
• Dispersion - 80° x 80°
• Sensitivity - 90 db/2.83 volts/meter
• Nominal Impedance - 4 Ohms. Compatible with 4, 6 or 8 ohm rated amplifiers.
• Recommended Amplifier Power - 20-200 watts per channel
• Crossover Frequency - 500 & 2,600 Hz
• Crossover Components - Precision Vojtko™ with custom air core coil and low DCR steel laminate inductors. Polyester film capacitors in series and low DF electrolytic capacitors in parallel
• High Frequency Transducer - 1" × 1.4" (2.6cm × 3.6cm) Folded Motion Transducer with 5.25" × 1.75" (13.3cm × 4.4cm) diaphragm
• Mid Frequency Driver: —
• Low Frequency Driver - Two 5.5" (14cm) aluminum cone woofers in a non-resonant asymmetrical chamber format. Cast polymer basket. Rigid structured dust caps reduce cone break-up.
• Binding Posts - Custom 5-way bi-wire tool-less binding posts
• Spikes - Included MiniETC™ Spikes
• Weight - 37lbs. (16.8kg) each
• Overall Dimensions(HxWxD) - 36.6 x 6.8 x 11.7 (92.9cm x 17.3cm x 29.7cm)

• Frequency Response - 70–25,000 Hz ±3dB
• Dispersion - 80° x 80°
• Sensitivity - 90 dB/2.83 volts/meter
• Nominal Impedance - 4 Ohms. Compatible with 4, 6 or 8 ohm rated amplifiers.
• Recommended Amplifier Power - 20-150 watts per channel
• Crossover Frequency - 2900 Hz
• Crossover Components - Custom air core coil and low DCR steel laminate inductors. Polyester film capacitors in series and low DF electrolytic capacitors in parallel. Overall system thermal/current protection.
• High Frequency Transducer - 1" × 1.4" (2.6cm × 3.6cm) Folded Motion Transducer with 5.25" × 1.75" (13.3cm × 4.4cm) diaphragm
• Low Frequency Driver - 4" (10.2cm) paper cone with stamped steel basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes. Folded bass reflex port.
• Binding Posts - Push style with banana jacks
• Weight - 6lbs. (3.2kg) each
• Overall Dimensions(HxWxD) - 12.6 x 5.6 x 5.25 (32cm x 14.2cm x 13.3cm)

• Frequency Response - 70–25,000 Hz ±3dB
• Dispersion - 80° x 80°
• Sensitivity - 90 dB/2.83 volts/meter
• Nominal Impedance - 4 Ohms. Compatible with 4, 6 or 8 ohm rated amplifiers.
• Recommended Amplifier Power - 20-200 watts per channel
• Crossover Frequency - 2600 Hz
• Crossover Components - Custom air core coil and low DCR steel laminate inductors. Polyester film capacitors in series and low DF electrolytic capacitors in parallel. Overall system thermal/current protection.
• High Frequency Transducer - 1" × 1.4" (2.6cm × 3.6cm) Folded Motion Transducer with 5.25" × 1.75" (13.3cm × 4.4cm) diaphragm
• Mid Frequency Driver: —
• Low Frequency Driver - 4" (10.2cm) paper cone with stamped steel basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes. Folded bass reflex port.
• Binding Posts - Push style with banana jacks
• Spikes: —
• Weight - 9.5lbs. (4.4kg) each
• Overall Dimensions(HxWxD) - 6 x 24 x 4.4 (15.2cm x 61cm x 11.3cm)

• Frequency Response - 60–25,000 Hz ±3dB
• Dispersion - 80° x 80°
• Sensitivity - 92 dB/2.83 volts/meter
• Nominal Impedance - 5 Ohms. Compatible with 4, 6 or 8 ohm rated amplifiers.
• Recommended Amplifier Power - 20-200 watts per channel
• Crossover Frequency - 2,700 Hz
• Crossover Components - Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Overall system thermal/current protection.
• High Frequency Transducer - 1" × 1.4" (2.6cm × 3.6cm) Folded Motion Transducer with 5.25" × 1.75" (13.3cm × 4.4cm) diaphragm
• Mid Frequency Driver: -
• Low Frequency Driver - 5.25” (13.3cm) aluminum cone with cast basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes.
• Binding Posts - Custom 5-way tool-less binding posts
• Spikes: —
• Weight - 12lbs. (5.4kg) each
• Overall Dimensions(HxWxD) - 11.4 x 6.8 x 9.5 (29cm x 17.3cm x 24cm)

• Frequency Response - 65–25,000 Hz ±3dB
• Dispersion - 80° x 80°
• Sensitivity - 91 dB/2.83 volts/meter
• Nominal Impedance - 4 Ohms. Compatible with 4, 6 or 8 ohm rated amplifiers.
• Recommended Amplifier Power - 20-200 watts per channel
• Crossover Frequency - 400 & 2,600 Hz
• Crossover Components - Custom air core coil and low DCR steel laminate inductors. Polyester film capacitors in series and low DF electrolytic capacitors in parallel. Overall system thermal/current protection.
• High Frequency Transducer - 1" × 1.4" (2.6cm × 3.6cm) Folded Motion Transducer with 5.25" × 1.75" (13.3cm × 4.4cm) diaphragm
• Mid Frequency Driver: —
• Low Frequency Driver - Two 5.5” (14cm) aluminum cone with cast polymer basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes.
• Binding Posts - Custom 5-way tool-less binding posts
• Spikes: —
• Weight - 18lbs. (8.2kg) each
• Overall Dimensions(HxWxD) - 6.9 x 16.5 x 10.5 (17.5cm x 42cm x 26.6cm)

• INPUTS
• Google Assistant enabled, Amazon™ Alexa enabled and Apple® AirPlay 2 enabled Asynchronous USB input (up to 32bit 192khz and DSD to DSD128), HDMI (ARC), Optical Toslink, Coaxial SPDIF Bluetooth™ Audio RCA input to built-in MM phono stage for turntables. Analogue input configurable for AV integration
• FEATURES
• Over the air firmware update – Latest software downloads and installs automatically. Linear power supply IR remote control Lockable front panel controls
• AMPLIFIER DESIGN
• Cyrus 4th generation Hybrid Class D amplifier – outputs 2 x 100W (into 6 Ω at 0.1% THD+N) SID – Speaker Impedance Detection (automatically calibrates amplifier to your speakers) Pre outputs – connect to additional power amplifiers High power, high voltage class AB headphone amplifier
• WI-FI CONNECTIVITY
• 802.11a/b/g/n/ac WEP, WPA, WPA2 security
• DIMENSIONS
• (H X W X D) – 85 x 220 x 390mm Weight – 5.6kg

• System design Two-way ported speaker, with 4.0 litres internal volumeThe cabinet is solidly constructed from cast aluminium
• Drive Unit125mm (5 in) cone bass/mid-range unit. Proprietary paper-pulp cone, diecast basket25mm (1 in) neodymium aluminium dorned tweeter
• Rated power (maximum) 80W
• Frequency range 70-22,000 Hz
• Impedance (nominal) 4Ω
• Sensitivity 83 dB/W, measured at 1m
• Crossover High-performance, 6 element design, 2.5 kHz, 12 dB/octave
• Recommended amplifier output power 100W
• Connections 4 mm, 5-way, gold plated binding posts
• Finish Silver or black paint finish
• Dimensions (WxHxD) (including terminals) 150 x 270 x 165 mm
• Net weight 3.010 kg

• Nominal Impedance 8Ω
• Recommended Amplifiers 20 - 150W
• Frequency Response 30Hz - 30kHz
• Sensitivity 88.5dB linear for 1 Watt at 1 Metre
• Bass/Midrange 6.5” (165mm) ProAc unit with Excel Magnet system, glass fibre weave cone and copper phase plug
• TWEETER - D2D ProAc 1” (25mm) silkdome air cooled and inner damping. Mirror image offset
• TWEETER - D2R The ProAc ribbon tweeter has a ribbon lighter than a human hair with rear chamber damping and alnico magnet
• Crossover Finest components on dedicated circuit board.
• Multistrand oxygen free copper cable throughout. Split for optional Bi Wiring or Bi Amplification
• Dimensions HEIGHT 17” (430mm) WIDTH 8” (203mm) DEPTH 10.25” (260mm) including grill thickness of 12mm WEIGHT 24lb (11kg) each
• Mode Stand mounted on rigid high mass
• Weight 24lb (11kg) a pair
• Grille Acoustically transparent crimplene
• Finish Available in the following real wood veneers: Black Ash, Mahogany, Cherry, Walnut, Natural Oak and Silk White. Rosewood and Ebony can be ordered at extra cost.

• Highlights
• •7 configurable inputs
• •Maximum channel separation
• •Advanced dual-mono design
• •Multi-channel surround sound processor integration
• •3 balanced (female XLR) and 4 single-ended (Mark Levinson-designed RCA) stereo input connectors
• •Separate main and record output connectors
• •Independent power supplies, communication circuits, andaudio circuits for each channel•Effective noise suppression and isolation techniques
• •AC power filtering
• •2 active voltage regulation stages for audio circuit sections
• •Independent power supplies for audio circuit and control circuitsections, each with its own low-noise toroidal transformer
• •Faraday shield between AC power line and low-voltagesecondaries
• •2 proprietary discrete volume attenuators
• •Deactivation of unused inputs to eliminate ground-loop noise

Specifications

• Power: 300 Watts RMS into 8 Ohms x 7; 450 Watts RMS x 7 into 4 Ohms
• Fully Balanced Design
• MFR: 20 Hz – 20 kHz, + 0.1 dB, – 0.2 dB
• THD+N: 0.05% 20 Hz – 20 kHz
• Input Sensitivity: 3 Volts for Full Output
• Input Impedance: 10 kOhms
• XLR and RCA Inputs for All Channels
• Dimensions: 9.7″ H x 17.3″ W x 20.3″ D
• Weight: 145 Pounds

• Design – 3-way-system floor-standing loudspeaker
• Recommended amplifier output – 20 – 250 Watt
• Sensitivity – 92 db/W/m
• Impedance – 4 Ohm
• Frequency range – 24 Hz – 50 kHz
• Equipment – 2 18 cm MOM®-Bass 1 C1 coaxial ribbon system
• Connection – Bi-Wiring /WBT
• Dimensions (H x W x D) – 112 x 26 x 33 cm
• Weight – 46 kg

• SPDIF optical – 1
• SPDIF coaxial – 1
• MC-BUS – Yes

• Maximum signal resolution – 16-bit/44.1kHz

• Height – 73
• Width – 215
• Depth – 360
• Weight (kg) 4.7

• SPDIF optical – 1
• SPDIF coaxial – 1
• Stereo RCA analogue – 2 Pairs Fixed
• PSX-R upgrade port – Yes
• MC-BUS – Yes

• Maximum Signal Resolution – 16-bit/44.1kHz

• Height – 73
• Width – 215
• Depth – 360
• Weight (kg) 3.6

• UP-OCC Tech. Stranded Copper Conductor
• Polypropylene Inner Insulation
• UP-OCC Silver Plated Spiral Conductor after Inner Insulation
• CL3 Rated PVC Inner Insulation
• Anti-Electrostatic PVC Outer Jacket

• UP-OCC Tech. Stranded Copper Conductor
• Polypropylene Inner Insulation
• UP-OCC Silver Plated Spiral Conductor after Inner Insulation
• CL3 Rated PVC Inner Insulation
• Anti-Electrostatic PVC Outer Jacket

• SPDIF coaxial – 1
• Stereo RCA analogue – 2 pairs fixed
• PSX-R upgrade port – Yes
• MC-BUS – Yes

• Optical SPDIF – 2
• Coaxial SPDIF – 3
• USB A – 1
• Ethernet – 1

• WAV – Yes
• FLAC – Yes
• ALAC – Yes
• AAC – Yes
• MP3 – Yes
• WMA – Yes
• AIFF – Yes
• Maximum signal resolution – 24-bit/192kHz
• *MQA decoding is not supported for TIDAL. Use Qobuz to stream in ultra high-resolution PCM

• Height 73
• Width 215
• Depth 360
• Weight (kg) 4.7

• Stereo RCA analogue – 1 pair fixed, 2 pairs variable
• BFA speaker – Yes
• Headphones – Yes
• PSX-R upgrade port – Yes
• MC-BUS – Yes

• Optical SPDIF – 2
• Coaxial SPDIF – 2
• USB B – 1
• Analogue RCA Phono – 6 pairs

• 24/192 resolution through optical/coaxial inputs,16/48 through USB
• (QXR adds 32bit / 768k , DSD 512 through USB)

• Watts into 6 Ohms – 88

• Height – 73
• Width – 215
• Depth – 360
• Weight (kg) – 6.9

• Stereo RCA analogue – 1 pair fixed, 2 pairs variable
• BFA speaker – Yes
• Headphones – Yes
• PSX-R upgrade port – Yes
• MC-BUS – Yes

• Optical SPDIF – 2
• Coaxial SPDIF – 2
• USB B – 1
• Analogue RCA Phono – 6 pairs

• 24/192 resolution through optical/coaxial inputs,16/48 through USB
• (QXR adds 32bit / 768k , DSD 512 through USB)

• Watts into 6 Ohms – 88

• Height – 73
• Width – 215
• Depth – 360
• Weight (kg) – 6.9

• Stereo line level, stereo balanced
• Stereo pair multi-way locking binding posts
• Input Sensitivity – 1 Volt for full output.
• Power Output – 75 watts into 8 ohms both channels working. 75 watts into 4 ohms both channels working.
• Frequency Response – 15Hz to 30 kHz +/-0dB.
• Bandwidth – 2Hz to 200kHz -3dB points.
• Signal to Noise – >85dB.
• Nett Weight – 25kg.
• Overall Dimensions (including terminals) – 250mm x 430mm x 350mm (HWD).

• Dual-Monaural Amplifier
• Input connectors: one pair Balanced, one pair single-ended
• Speaker Connectors: four pairs of Hurricane loudspeaker outputs, banana-plug sockets per channel, except on European versions
• Control I/O: Ethernet, RS-232, Trigger In and Out, USB-A, Mini USB
• Rated Output Power: 250 wpc RMS @ 8Ω, 20Hz to 20kHz @ <0.3% THD, full output from 2.83VRMS
• Frequency Response: 10Hz to 20kHz ±0.2dB
• Signal-to-Noise Ratio: >85dB, reference level: 2.83 VRMS
• Input Impedance: 60 kΩ balanced; 30 kΩ unbalanced
• Voltage Gain: 26dB
• Input Sensitivity: 2.83VRMS output at 142mVRMS input • Power Requirements: 100V~, 120V~, 230V~, factory set for destination country, 1500W
• Dimensions (H x W x D): (with feet): 7.75” (19.7cm) / (without feet): 7” x 17.75” x 20” (19.7cm/17.8cm x 45.1cm x 50.8cm)
• Weight: 107 lbs (48.5kg)
• Packaged dimensions (H x W x D): 0.7’’ x 17.8’’ x 7.8’’ (17.8 x 451 x 197mm)
• Packaged weight: 124 lb (56.3 kg)

• RIAA frequency response 20Hz to 20kHz, ±0.3dB
• Infrasonic filter defeatable, 15Hz, 2nd order (12dB/octave)
• Input resistance (Moving Magnet Mode) 47kΩ
• Input capacitance (Moving Magnet Mode) selectable; 50, 100, 150, 200, or 680pF
• Gain (Moving Magnet Mode) 40dB @ 1kHz
• THD+N, 20Hz to 20kHz, 2VRMS output (Moving Magnet Mode) <0.03%
• Input resistance (Moving Coil Mode) selectable; 20, 33, 50, 66, 100, 200, 330, 500, 1000, or 47k
• Input capacitance (Moving Coil Mode) 50pF
• THD+N, 20Hz to 20kHz, 2VRMS output (Moving Coil Mode) <0.02%, 50 or 60dB settings, <0.04%, 70db setting
• Gain (Moving Coil Mode) selectable; 50, 60, or 70dB @ 1kHz
• Output Power 200W RMS per channel @ 8 Ω, 20Hz – 20kHz
• Damping Factor >400 @ 20Hz, referred to 8 Ω
• Frequency Response 20Hz – 20kHz, ±0.13dB; 2Hz – 250kHz, +0.2dB/–3dB
• Signal-to-Noise Ratio >98dB (20Hz – 20kHz, unweighted); >103dB (20Hz – 20kHz, A-wtd), referred to full output – maximum volume setting
• Voltage Gain 40.7dB (maximum volume setting)
• Total Harmonic Distortion <0.01% @ 1kHz, 200W, 8 Ω; <0.1% @ 20kHz, 200W, 8 Ω
• Preamplifier Section (Analog) Input Impedance
• Preamplifier Section (Analog) Input Overload
• Preamplifier Section (Digital) DAC Board - same as No 585
• DAC output voltage @ full scale (0dBFS) 3.7VRMS
• DAC frequency response 20Hz to 20kHz, +0 / ¬–0.2dB
• DAC THD, full scale (0dBFS) <0.0001% @ 1kHz, <0.0003% @ 20kHz
• DAC SNR (referred to 3.7VRMS / 0dBFS output) >120dB (A-weighted)
• PCM sample rates/bit depth 32, 44.1, 48, 88.2, 96, 176.4, or 192kHz; up to 32 bits
• DSD Native or DoP (DSD over PCM), single- and double-speed (2.8 and 5.6MHz)

• DESIGN Two-piece construction. Soft synthetic leather earcups with Comfort-Tilt™ earcup. Flexi-Point™ headband. Fold-flat design.
• FREQUENCY RESPONSE ON-AXIS 20 Hz — 20 kHz
• HIGH FREQUENCY DRIVER 1.5-inch / 40-mm mylar
• SENSITIVITY ROOM / ANECHOIC 106 dB /
• IMPEDANCE 32 ohms
• FINISHES Black
• MAXIMUM INPUT POWER 15 mW

• DESIGN Supra-aural active noise-cancelling technology. Dual microphone design. In-line remote and microphone. Solid aluminum and composite construction. Breathable protein leather earcups with Comfort-Tilt™ earcup. Flexi-Point™ headband. Fold-flat design.
• FREQUENCY RESPONSE ON-AXIS 20 Hz — 20 kHz
• HIGH FREQUENCY DRIVER 1.5-inch / 40-mm mylar
• SENSITIVITY ROOM / ANECHOIC 106 dB NC off / 105 dB NC on /
• IMPEDANCE 26-ohms NC OFF / 150-ohms NC ON
• FINISHES Black & Silver
• MAXIMUM INPUT POWER 15 mW

• DSD SUPPORT: Up to DSD128 5.6MHz, 1-bit
• PCM SUPPORT: Up to 384kHz, 16–32-bit, Stereo
• OUTPUT:
• PHYSICAL: Stereo 4 mm banana binding posts
• SPEAKER LOAD: ≥ 4 Ohm
• RATED POWER OUTPUT (PER CHANNEL): 60W into 8 Ohm Speaker 100W into 4 Ohm Speaker
• INPUT: Analogue RCA stereo and mini-jack input via included USB adapter
• POWER SUPPLY: Oversized 100–240V AC auto-ranging
• PHYSICAL:
• FINISH: Raw brushed aluminium
• DIMENSIONS: 361mm (W), 323mm (D), 58mm (H), 4.5kg
• STREAMING PROTOCOL: UPnP AV protocol with audio streaming extension (OpenHome) Roon Ready Spotify Connect Apple AirPlay Gapless Playback On-Device Playlist
• SUPPORTED AUDIO FILE FORMATS: DSD Lossless: DSF (DSD), DIFF (DSD), DoP (DSD) PCM Lossless: FLAC, Apple Lossless (ALAC), WAV, AIFF Compressed (lossy) Audio: MP3, AAC (in M4A container) MQA
• SUPPORTED CONTROL DEVICES: All models of Apple iPad (v2 or later). iOS 8.0 or later required. Full Retina Display support. Android devices. Android 4.0 (Ice Cream Sandwich) or later required

• DSD SUPPORT: Up to DSD256 11.2MHz, 1-bit
• PCM SUPPORT: Up to 384kHz, 16–32-bit, Stereo
• DIGITAL OUTPUT STAGE:
• USB: DSD256, 11.2MHz, 1-bit, Stereo PCM 44.1–384kHz, 16–24-bit, Stereo
• OPTICAL, COAXIAL RCA, COAXIAL BNC & AES/EBU: DSD (DoP, DSD over PCM) 2.8MHz, 1-bit PCM 44.1kHz–192kHz, 16–24-bit
• POWER SUPPLY: Internal shielded 100–240V AC auto-ranging
• PHYSICAL: FINISH: Raw brushed aluminium or black anodised brushed aluminium D2 UNIT: 300mm (W), 244mm (D), 60mm (H), 2.5kg PACKAGING: 470mm (W), 340mm (D), 170mm (H), 4.5kg
• STREAMING PROTOCOL: UPnP AV protocol with audio streaming extension (OpenHome) Roon Ready Spotify Connect Apple AirPlay Gapless Playback On-Device Playlist
• SUPPORTED CONTROL DEVICES: All models of Apple iPad (v2 or later). iOS 8.0 or later required. Full Retina Display support. Android devices. Android 4.0 (Ice Cream Sandwich) or later required

• DSD SUPPORT: Up to DSD128 5.6MHz, 1-bit
• PCM SUPPORT: Up to 384kHz, 16–32bit, Stereo
• UPSAMPLING RATES & BIT DEPTHS: DSD upsampling option for all files up to 96kHz PCM 192kHz upsampling option for all files up to 96kHz
• ANALOG OUTPUT STAGE: Wolfson WM8741 DAC chips, 1 chip per channel Fully balanced layout with high-quality components
• DIGITAL OUTPUT STAGE:
• BNC SPDIF: PCM 44.1kHz–192kHz, 16–24-bit DSD (DoP, DSD over PCM) 2.8MHz, 1-bit
• POWER SUPPLY: Internal 100–240V AC auto-ranging
• PHYSICAL: FINISH: Raw brushed aluminium or black anodised brushed aluminium D2 UNIT: 300mm (W), 244mm (D), 60mm (H), 2.5kg PACKAGING: 470mm (W), 340mm (D), 170mm (H), 4.5kg
• SUPPORTED CONTROL DEVICES: All models of Apple iPad (v2 or later). iOS 8.0 or later required. Full Retina Display support. Android devices. Android 4.0 (Ice Cream Sandwich) or later required

• POWER REQUIREMENTS Supplied 220/240-50 Hz or 110/120-60Hz
• (Selectable by switch on rear panel)
• POWER CONSUMPTION 23 W max
• FREQUENCY RESPONE 1 Hz - 20 kHz ±0.25 dB
• OUTPUT LEVEL 2.0 V RMS at 1 kHz, 0 dB
• OUTPUT IMPEDANCE 50Ω recommended min load 1 KΩ
• D to A TYPE 24 bit - 192 kHz Burr-Brown Delta-Sigma
• TOTAL HARMONIC DISTORTION < 0.0008% at 1 kHz, 0 dB
• THD + NOISE > -97dB
• DYNAMIC RANGE > 100 dB
• LASER TYPE Semiconductor ALGaAs
• WAVELENGTH 790 nm ± 25 nm
• LIGHT OUTPUT (CW) 0.18 mW typical
• TRANSPORT Philips CDM 12.x
• MAINS VOLTAGE @ 110/120V North America
• @ 50Hz 220/240V Europe, Asia and UK
• WEIGHT 6 Kg (13.2 lbs)
• DIMENSIONS (W x H x D) mm 430 x 70 x 340 (16.9 x 2.7 x 15.5 inches)

• Output power (Watts RMS) @ 8/4 ohm100/160W
• Amplifier stage gain26dB
• Frequency response (@1 Watt RMS; -3db)1Hz - 450kHz
• Slew Rate (@ 8 Ohm)>80V/µS
• THD<0,05%
• S/N ratio>95dB
• Unbalanced input impedance 51kOhm, 150pF
• Balanced input impedance 30kOhm
• Stand-by power consumptionless than 1W
• Maximum power consumption 400W
• Dimensions and weight 450x110x430mm (W x H x D), 16,5 kg
• Shipping dimensions and weight 550x250x580mm (W x H x D), 18,5kg
• INPUTS and OUTPUTS:
• 4 unbalanced inputs
• 1 balanced input
• 1 monitor input
• 1 analog input can be assigned to bypass the preamp (as “direct”)
• 1 optional USB digital input
• 1 unbalanced preamp output
• 1 unbalanced record output
• 1 output for headphones

• DESIGN Single high-excursion driver, sealed enclosure, patented built-in Ultra-Class-D™ power amplifier, USB port
• AMPLIFIER 1,700 watts Dynamic Peak / 850 watts RMS
• AMPLIFIER FEATURES Auto-On / Off, Trigger On / Off, soft clipping, electrical shorting protection, thermal protection
• FREQUENCY RESPONSE ON-AXIS ±3 dB 17Hz – 250Hz
• ROOM CORRECTION Paradigm Perfect Bass Kit™ (sold separately)
• LOW FREQUENCY DRIVER 254-mm (10 in) high-excursion mineral-filled co-polymer polypropylene cone with RCR™ resonance-control ribbing on underside, FEA-optimized overmolded, inverted Santoprene® surround, 38-mm (1-1/2 in) diameter split voice-coil construction (60-mm coil lengths), dual Nomex® spiders, high-temperature Apical™ formers, dual 12-mm-thick top plates, 10-lb (4.5 kg) triple ceramic (hard ferrite) magnet structure, AVS™ die-cast heatsink chassis
• SENSITIVITY ROOM / ANECHOIC 100 mV mono /
• IMPEDANCE RCA: 10k ohms; XLR: 20k ohms
• FINISHES Satin Black
• WEIGHT 37 lbs. (16.8 kg)
• DIMENSIONS HXWXD 13.5" × 13.75" × 12.5625" (34.3cm × 34.9cm × 31.9cm)
• LOW FREQUENCY EXTENSION 18 Hz (DIN)
• LOW PASS FILTER FREQUENCY Variable 35 Hz - 150 Hz; Bypass Option
• SUB / SAT PHASE ALIGNMENT Variable 0° - 180°
• INPUTS RCA (S/E) Left and Right or Sub-Out / LFE or Balanced XLR. From Sub-Out / LFE-Out of preamp, processor or other line-level source
• Specifications are subject to change without notice.

• DESIGN 8" (203 mm) Driver, 75W RMS (150W Dynamic Peak), Class-D power amplifier
• AMPLIFIER 150 watts Dynamic Peak; 75 watts RMS
• AMPLIFIER FEATURES Auto-On / Off, improved soft-clipping circuitry
• FREQUENCY RESPONSE ON-AXIS ±3 dB from 34Hz – 200Hz
• LOW FREQUENCY DRIVER 8" (203 mm) carbon-loaded polypropylene cone
• SENSITIVITY ROOM / ANECHOIC 100mV mono (max. volume) /
• IMPEDANCE RCA: 8.3k ohms
• FINISHES Satin Black
• WEIGHT 26.5 lbs. (12.05 kg)
• LOW FREQUENCY EXTENSION 28 Hz (DIN)
• LOW PASS FILTER FREQUENCY Variable 35 Hz - 120 Hz; Bypass Option
• SUB / SAT PHASE ALIGNMENT Variable select 0° or 180° via panel switch
• INPUTS Two RCA (Left and Right/LFE) for left/right lineout or Sub-Out from receiver/processor or other line-level source, Two Speaker Level (Left and Right) for input from amplifier or other speaker level source
• DIMENSIONS HXWXD (INCLUDES GRILLE). 14 3/16" × 12 3/4" × 14 1/8" (36.1cm × 32.4cm × 35.8cm)

• DESIGN 10" (254 mm) Driver, 120W RMS (250W Dynamic Peak), Class-D amplifier, App controlled via smartphone, Anthem Room Correction (ARC®) Ready.
• AMPLIFIER 250 watts Dynamic Peak; 120 watts RMS
• AMPLIFIER FEATURES Auto-On / Off, improved soft-clipping circuitry
• FREQUENCY RESPONSE ON-AXIS ±3 dB from 29Hz – 200Hz
• ROOM CORRECTION Anthem Room Correction (ARC®)
• LOW FREQUENCY DRIVER 10" (254 mm) carbon-loaded polypropylene cone
• SENSITIVITY ROOM / ANECHOIC 100mV mono (max. volume) /
• IMPEDANCE RCA: 8.3k ohms
• FINISHES Satin Black
• WEIGHT 33.5 lbs. (15.23 kg)
• LOW FREQUENCY EXTENSION 26 Hz (DIN)
• LOW PASS FILTER FREQUENCY Variable 35Hz - 120Hz; Bypass Option
• SUB / SAT PHASE ALIGNMENT Continuously Variable 0° - 180° Under App. Control
• INPUTS Two RCA (Left and Right/LFE) for left/right lineout or Sub-Out from receiver/processor or other line-level source, Two Speaker Level (Left and Right) for input from amplifier or other speaker level source, One Micro USB for ARC™ and firmware updates
• COMPATIBLE PRODUCTS Defiance WT Wireless Kit (sold separately)
• DIMENSIONS HXWXD (INCLUDES GRILLE). 15 11/16" × 14 1/4" × 15 5/8" (39.9cm × 36.2cm × 39.7cm)

• DESIGN 12" (305 mm) Driver, 120W RMS (250W Dynamic Peak), Class-D amplifier, App controlled via smartphone, Anthem Room Correction (ARC®) Ready.
• AMPLIFIER 250 watts Dynamic Peak;120 watts RMS
• AMPLIFIER FEATURES Auto-On / Off, improved soft-clipping circuitry
• FREQUENCY RESPONSE ON-AXIS ±3 dB from 23Hz – 200Hz
• ROOM CORRECTION Anthem Room Correction (ARC®)
• LOW FREQUENCY DRIVER 12" (305 mm) carbon-loaded polypropylene cone
• SENSITIVITY ROOM / ANECHOIC 100mV mono (max. volume) /
• IMPEDANCE RCA: 8.3k ohms
• FINISHES Satin Black
• WEIGHT 42 lbs. (19.1 kg)
• LOW FREQUENCY EXTENSION 18 Hz (DIN)
• LOW PASS FILTER FREQUENCY Variable 35Hz - 120Hz; Bypass Option
• SUB / SAT PHASE ALIGNMENT Continuously Variable 0° - 180° Under App. Control
• INPUTS Two RCA (Left and Right/LFE) for left/right lineout or Sub-Out from receiver/processor or other line-level source, Two Speaker Level (Left and Right) for input from amplifier or other speaker level source, One Micro USB for ARC™ and firmware updates
• COMPATIBLE PRODUCTS Defiance WT Wireless Kit (sold separately)
• DIMENSIONS HXWXD (INCLUDES GRILLE). 17 15/16" × 16 1/2" × 17 7/8" (45.6cm × 41.9cm × 45.4cm)

• DESIGN 10" (254 mm) Driver with ART™ Surround, 300W RMS (600W Dynamic Peak), Class-D amplifier, App controlled via smartphone, Anthem Room Correction (ARC®) Included.
• AMPLIFIER 600 watts Dynamic Peak; 300 watts RMS
• AMPLIFIER FEATURES Auto-On / Off, improved soft-clipping circuitry
• FREQUENCY RESPONSE ON-AXIS ±3 dB from 29Hz – 240Hz
• ROOM CORRECTION Anthem Room Correction (ARC®) Included
• LOW FREQUENCY DRIVER 10" (254 mm) ART™ Surround with carbon-loaded polypropylene cone
• SENSITIVITY ROOM / ANECHOIC 100mV mono (max. volume) /
• IMPEDANCE RCA: 10k ohms
• FINISHES Satin Black
• WEIGHT 42 lbs. (19.1 kg)
• LOW FREQUENCY EXTENSION 24 Hz (DIN)
• LOW PASS FILTER FREQUENCY Variable 30Hz - 120Hz
• SUB / SAT PHASE ALIGNMENT Variable 0° - 180° App or Control Panel
• INPUTS Three RCA (Left, Right, and LFE) for left/right lineout and/or Sub-Out from receiver/processor or other line-level source, Two Speaker Level (Left and Right) for input from amplifier or other speaker level source, One Micro USB for ARC™ and firmware upd
• COMPATIBLE PRODUCTS Defiance WT Wireless Kit (sold separately)
• DIMENSIONS HXWXD (INCLUDES GRILLE). 16 7/16" × 15" × 16 7/16" (41.7cm × 38.1cm × 41.7cm)

• DESIGN 12" (305 mm) Driver with ART™ Surround, 650W RMS (1300W Dynamic Peak), Class-D amplifier, App controlled via smartphone, Anthem Room Correction (ARC®) Included.
• AMPLIFIER 1300 watts Dynamic Peak; 650 watts RMS
• AMPLIFIER FEATURES Auto-On / Off, improved soft-clipping circuitry
• FREQUENCY RESPONSE ON-AXIS ±3 dB from 20Hz – 230Hz
• ROOM CORRECTION Anthem Room Correction (ARC®) Included
• LOW FREQUENCY DRIVER 12" (305 mm) ART™ Surround with carbon-loaded polypropylene cone
• SENSITIVITY ROOM / ANECHOIC 100mV mono (max. volume) /
• IMPEDANCE RCA: 10k ohms
• FINISHES Satin Black
• WEIGHT 62 lbs. (28.1 kg)
• LOW FREQUENCY EXTENSION 15 Hz (DIN)
• LOW PASS FILTER FREQUENCY Variable 30Hz - 120Hz
• SUB / SAT PHASE ALIGNMENT Variable 0° - 180° App or Control Panel
• INPUTS Three RCA (Left, Right, and LFE) for left/right lineout and/or Sub-Out from receiver/processor or other line-level source, Two Speaker Level (Left and Right) for input from amplifier or other speaker level source, One Micro USB for ARC™ and firmware u
• COMPATIBLE PRODUCTS Defiance WT Wireless Kit (sold separately)
• DIMENSIONS HXWXD (INCLUDES GRILLE). 19 7/16" × 18" × 19 7/16" (49.3cm × 45.7cm × 49.4cm)

• DESIGN 15" (381 mm) Driver with ART™ Surround, 900W RMS (1800W Dynamic Peak), Class-D amplifier, App controlled via smartphone, Anthem Room Correction (ARC®) Included.
• AMPLIFIER 1800 watts Dynamic Peak; 900 watts RMS
• AMPLIFIER FEATURES Auto-On / Off, improved soft-clipping circuitry
• FREQUENCY RESPONSE ON-AXIS ±3 dB from 18Hz – 240Hz
• ROOM CORRECTION Anthem Room Correction (ARC®) Included
• LOW FREQUENCY DRIVER 15" (381 mm) ART™ Surround with carbon-loaded polypropylene cone
• SENSITIVITY ROOM / ANECHOIC 100mV mono (max. volume) /
• IMPEDANCE RCA: 10k ohms
• FINISHES Satin Black
• WEIGHT 92 lbs. (41.7 kg)
• LOW FREQUENCY EXTENSION 14 Hz (DIN)
• LOW PASS FILTER FREQUENCY Variable 30Hz - 120Hz
• SUB / SAT PHASE ALIGNMENT Variable 0° - 180° App or Control Panel
• INPUTS One Balanced XLR (LFE) for Sub-Out from receiver/processor Three RCA (Left, Right, and LFE) for left/right lineout and/or Sub-Out from receiver/processor or other line-level source Two Speaker Level (Left and Right) for input from amplifier or other speak
• COMPATIBLE PRODUCTS Defiance WT Wireless Kit (sold separately)
• DIMENSIONS HXWXD (INCLUDES GRILLE). 24 5/8" × 23 3/16" × 24 5/8" (62.6cm × 59cm × 62.6cm)

Features

• High quality preamplifier including digitally controlled analogue volume control
• UPnP-enabled to allow streaming of audio files at up to 24bit/192kHz resolution from Naim hard disk servers, network-attached storage (NAS) devices or any home computer
• Performance upgradable with XP5 XS, XPS or 555 PS power supply
• Supports a broad range of music formats: WAV, FLAC, Apple Lossless, AIFF, AAC, DSF64 and DFF64, Windows Media-formatted files, Ogg Vorbis and MP3
• Six 24bit/192kHz-capable digital inputs (S/PDIF) to support optimum connection to external sources
• Spotify Connect built-in to stream millions of songs from the world’s most popular streaming service
• Bluetooth connectivity with aptX audio codec
• Optional DAB+/DAB/FM radio module
• vTuner 5* full-service internet radio
• Multiroom & Party Mode compatible
• Naim app for iOS and Android

AUDIO OUTPUTS
• Power Outputs - ± 22V, ± 10V, 2 x 15V

• Mains Supply - 100V, 115V, 230V; 50 or 60Hz

• Dimensions - 87 x 432 x 314mm (H x W x D)

• Front - Brushed and black anodised
• Case - Black powder coated

AUDIO INPUTS
• Analogue Inputs - 1 x XLR
• Input Impedance - 18kΩ

AUDIO OUTPUTS

• Gain - +29dB
• Frequency Response - -3dB at 3Hz - 50kHz

SPEAKER OUTPUTS

• Speaker Outputs - L and R, 4mm “banana” sockets
• Power Output - 80W/channel, 8Ω
• Transient - 400VA

POWER

• Mains Supply - 100V, 115V, 230V; 50 or 60Hz
• Power Consumption (quiescent) - 25VA

Physical

• Dimensions (HxWxD) 87 x 432 x 314 mm
• Weight 15.8 kg
• Shipping Dimensions 240 x 590 x 500 mm
• Shipping Weight 18.4 kg
• Supplied with Standard Interconnect

FINISH

• Front - Brushed and black anodised
• Case - Black powder coated

Features

• High quality preamplifier including digitally controlled analogue volume control
• UPnP-enabled to allow streaming of audio files at up to 24bit/192kHz resolution from Naim hard disk servers, network-attached storage (NAS) devices or any home computer
• Performance upgradable with XP5 XS, XPS or 555 PS power supply
• Supports a broad range of music formats: WAV, FLAC, Apple Lossless, AIFF, AAC, DSF64 and DFF64, Windows Media-formatted files, Ogg Vorbis and MP3
• Six 24bit/192kHz-capable digital inputs (S/PDIF) to support optimum connection to external sources
• Spotify Connect built-in to stream millions of songs from the world’s most popular streaming service
• Bluetooth connectivity with aptX audio codec
• Optional DAB+/DAB/FM radio module
• vTuner 5* full-service internet radio
• Multiroom & Party Mode compatible
• Naim app for iOS and Android

AUDIO OUTPUTS
• Power Outputs - ± 22V, ± 10V, 2 x 15V

• Mains Supply - 100V, 115V, 230V; 50 or 60Hz

• Dimensions - 87 x 432 x 314mm (H x W x D)

• Front - Brushed and black anodised
• Case - Black powder coated

• SYSTEM TYPE: 3-way Bass-reflex Monitor
• LOW FREQUENCY TRANSDUCER: 12-inch (300mm) pure pulp cone woofer (JW3000SW-8)
• MID FREQUENCY TRANSDUCER: 5-inch (125mm) polymer-coated pure pulp cone (JM125PC-8)
• HIGH FREQUENCY TRANSDUCER: 1-inch (25mm) Magnesium/Aluminum alloy dome tweeter with waveguide (054ALMg-1)
• RECOMMENDED AMPLIFIER POWER: 10-200 Watts RMS
• FREQUENCY RESPONSE (-6DB): 44Hz - 40kHz
• SENSITIVITY (2.83V@1M): 90dB
• NOMINAL IMPEDANCE: 6 Ohm
• CROSSOVER FREQUENCIES: 640Hz, 5kHz
• ENCLOSURE TYPE: Bass-reflex via front-firing port
• INPUTS: Five-way Binding Posts
• FINISHES: Black Woodgrain with Black Cloth Grille
• DIMENSIONS (H X W X D): 23.5 x 14.25 x 12 inches (597 x 362 x 305mm)
• WEIGHT: 52.4 lbs (23.8kg) each

• Frequency Response - 65–25,000 Hz ±3dB
• Dispersion - 80° x 80°
• Sensitivity - 91 dB/2.83 volts/meter
• Nominal Impedance - 4 Ohms. Compatible with 4, 6 or 8 ohm rated amplifiers.
• Recommended Amplifier Power - 20-200 watts per channel
• Crossover Frequency - 400 & 2,600 Hz
• Crossover Components - Custom air core coil and low DCR steel laminate inductors. Polyester film capacitors in series and low DF electrolytic capacitors in parallel. Overall system thermal/current protection.
• High Frequency Transducer - 1" × 1.4" (2.6cm × 3.6cm) Folded Motion Transducer with 5.25" × 1.75" (13.3cm × 4.4cm) diaphragm
• Mid Frequency Driver: —
• Low Frequency Driver - Two 5.5” (14cm) aluminum cone with cast polymer basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes.
• Binding Posts - Custom 5-way tool-less binding posts
• Spikes: —
• Weight - 18lbs. (8.2kg) each
• Overall Dimensions(HxWxD) - 6.9 x 16.5 x 10.5 (17.5cm x 42cm x 26.6cm)

Anthem AVM 60

Anthem PVA 4

Anthem PVA 2

• Sib satellite
• Type 2-way compact bass-reflex speaker
• Drivers 5" (13cm) Polyflex mid-bass 3/4" (19mm) mylar tweeter dome
• Frequency response (+/- 3dB) 75Hz - 20kHz
• Low frequency point (-6dB) 69 Hz
• Sensitivity (2.83V/1m) 90 dB
• Nom. impedance 8 Ohms
• Crossover frequency 3500 Hz
• Recommended amplifer power 15 - 75 W
• Dimensions (HxWxD) 247 x 142 x 164 mm
• Weight 2,1 kg

• SUB AIR, Flat bass-reflex subwoofer,
• integrated 150W BASH® amp
• Speaker driver (diameter) 8" (21cm)
• Bass cutoff frequency (-6dB) 35Hz
• Frequency response (+/- 3dB) 40Hz-200Hz
• Crossover cutoff frequency Variable 50Hz - 200Hz
• Input panel Left Right / LFE
• Continuous power output 110W
• Peak power 150W
• Phase adjustment 0 - 180° switch
• Power functions ON Auto (1 W) OFF (0,5 W)
• Dimensions (HxWxD) 16.1"x14.2"x6.3" (410mmx360mmx160mm)
• Weight 17 lbs (7,65 Kg)

• Wireless connection
• Range in Meter 15 meters (in a room)
• Sound Sampling 16 bits
• Sampling Frequency 44,1kHz
• Coding delay (latency) 13ms
• Radio transmission powers or sensitivity 0dBm
• Radio transmission frequency band 2,4Ghz ISM band

Anthem MRX 1120

Anthem MRX 720

Anthem MRX 520

Paradigm Persona SUB

Paradigm Persona 3F

Paradigm Persona 5F

Paradigm Persona 7F

Anthem STR Integrated

Paradigm Prestige SUB 1000

Paradigm Prestige 95F

Paradigm Prestige 85F

Paradigm Prestige 75F

Paradigm Prestige 15B

Paradigm Premier 800F

Paradigm Premier 700F

 Paradigm Premier 200B

 Paradigm Premier 100B

                SPECIFICATII TEHNICE

           Paradigm Monitor SE 6000F

                SPECIFICATII TEHNICE

           Paradigm Monitor SE 3000f

                SPECIFICATII TEHNICE

           Paradigm Monitor SE

Specificatii Tehnice

Martin Logan Dynamo 400

• Frequency Response- 30–200 Hz ±3 dB. Anechoic in LFE mode.
• Low Frequency Transducer 8” (20.3cm) high-excursion, inverted surround, polypropylene cone in a stamped steel basket with extended throw driver assembly. Ported.
• Controls (Backplate)-Level: Min–Max
• Low-Pass Filter (Frequency): 35–120Hz Phase: 0°, 180° Power Mode: On, Auto
• Amplifier-75 Watts (150 peak)
• Feet-Rubber
• Impedance-RCA: 8,300 Ohms Speaker Level: 2,000 Ohms (red to black)
• Power Draw-Typical: 20W, Max: 90W, Idle: 4W, Standby: 0.5W

• 15.2" x 13.3 " x 13.7 " (38.5 cm x 33.7cm x 34.8 cm)
• Weight   28.5 lbs. (12.9 kg)

Specificatii Tehnice

Martin Logan Dynamo 600X

• Frequency Response- 27–200 Hz ±3 dB. Anechoic in LFE mode.
• Low Frequency Transducer 10” (25.4cm) high-excursion, inverted surround, polypropylene cone in a stamped steel basket with extended throw driver assembly. Ported.
• Sub Control App: iOS and Android
• Anthem Room Correction: iOS, Android, and PC
• Controls (Backplate)-Level: Min–Max Setting Control: Local, App Power Mode: On, Trigger, Auto
• Controls (via Bluetooth) Level: -40 to 12dB Low-Pass Filter (Frequency): 35–120Hz Low-Pass Filter (Order): Bypass, Third, Fourth Phase: 0–180° (1° Increments) Phase (Polarity): Normal, Inverted Preset Listening Modes: Music, Night, Movie 20–30Hz Level: ±10dB Anthem Room Correction (ARCTM): On, Off Tone Sweep (20–120Hz): On, Off, Pause (Frequency)
• Inputs (Audio)- Line Level: Left, Right, and LFE Speaker Level: Left and Right via banana jacks
• Inputs (Audio, Wireless)-SWT-X Receiver & Transmitter (sold separately)
• Inputs (Other)USB: Micro USB (for ARC/Firmware Update) Trigger: 3.5mm, 5–24 DC
• Amplifier-120 Watts (240 peak)
• Anthem Room Correction (ARC)
• Feet-Rubber
• Impedance-RCA: 8,300 Ohms Speaker Level: 2,000 Ohms (red to black)
• Power Draw-Typical: 30W, Max: 150W, Idle: 14W, Standby: 0.5W

• 16.3" x 14.5 " x 14.9 " (41.5 cm x 36.7cm x 37.8 cm)
• Weight   35.5 lbs. (16.1 kg)

Specificatii Tehnice

Martin Logan Dynamo 800X

• Frequency Response- 24–200 Hz ±3 dB. Anechoic in LFE mode.
• Low Frequency Transducer 10” (25.4cm) high-excursion, inverted surround, polypropylene cone in a stamped steel basket with extended throw driver assembly; sealed non- resonant cabinet design.
• Sub Control App: iOS and Android
• Anthem Room Correction: iOS, Android, and PC
• Controls (Backplate)-Level: Min–Max Setting Control: Local, App Power Mode: On, Trigger, Auto
• Controls (via Bluetooth) Level: -40 to 12dB Low-Pass Filter (Frequency): 35–120Hz Low-Pass Filter (Order): Bypass, Third, Fourth Phase: 0–180° (1° Increments) Phase (Polarity): Normal, Inverted Preset Listening Modes: Music, Night, Movie 20–30Hz Level: ±10dB Anthem Room Correction (ARC): On, Off Tone Sweep (20–120Hz): On, Off, Pause (Frequency)
• Inputs (Audio)- Line Level: Left, Right, and LFE Speaker Level: Left and Right via banana jacks
• Inputs (Audio, Wireless)-SWT-X Receiver & Transmitter (sold separately)
• Inputs (Other)USB: Micro USB (for ARC/Firmware Update) Trigger: 3.5mm, 5–24 DC
• Amplifier-300 Watts (600 peak)
• Anthem Room Correction (ARC)
• Feet-Rubber, ETC (Energy Transfer Coupler) Spikes
• Impedance-RCA: 8,300 Ohms Speaker Level: 2,000 Ohms (red to black)
• Power Draw-Typical: 700W, Max: 360W, Idle: 10W, Standby: 0.5W

• Dimensions (HxWxD),
• Front-Firing-14.6" x 12.4" x 12.7" (37.1 cm x 31.5cm x 32.4cm)
• Dimensions (HxWxD), Down-Firing-13.7" x 12.4 " x 13.1 " (34.8 cm x 31.5cm x 33.3 cm)
• Finish-Satin Black
• Weight   30 lbs. (13.6 kg)

• Frequency Response- 22–200 Hz ±3 dB. Anechoic in LFE mode.
• Low Frequency Transducer 12” (30.5cm) high-excursion, inverted surround, polypropylene cone in a cast aluminum basket with extended throw driver assembly; sealed non- resonant cabinet design.
• Sub Control App: iOS and Android
• Anthem Room Correction: iOS, Android, and PC
• Controls (Backplate)-Level: Min–Max Setting Control: Local, App Power Mode: On, Trigger, Auto
• Controls (via Bluetooth) Level: -40 to 12dB Low-Pass Filter (Frequency): 35–120Hz Low-Pass Filter (Order): Bypass, Third, Fourth Phase: 0–180° (1° Increments) Phase (Polarity): Normal, Inverted Preset Listening Modes: Music, Night, Movie 20–30Hz Level: ±10dB Anthem Room Correction (ARC): On, Off Tone Sweep (20–120Hz): On, Off, Pause (Frequency)
• Inputs (Audio)- Line Level: Left, Right, and LFE Speaker Level: Left and Right via banana jacks XLR: LFE
• Inputs (Audio, Wireless)-SWT-X Receiver & Transmitter (sold separately)
• Inputs (Other)USB: Micro USB (for ARC/Firmware Update) Trigger: 3.5mm, 5–24 DC
• Amplifier-650 Watts (1,800 peak)
• Anthem Room Correction (ARC)
• Feet-Rubber, ETC (Energy Transfer Coupler) Spikes
• Impedance-RCA: 8,300 Ohms Speaker Level: 2,000 Ohms (red to black) XLR: 28,000 Ohms (pin 2 to 3)
• Power Draw-Typical: 100W, Max: 600W, Idle: 15W, Standby: 0.5W

• Dimensions (HxWxD),
• Front-Firing- 17.2" x 15" x 16.2" (43.6 cm x 38cm x 41.1cm)
• Dimensions (HxWxD), Down-Firing-17.1" x 15 " x 15.6 " (43.5 cm x 38cm x 39.6 cm)
• Finish-Satin Black
• Weight   46 lbs. (20.9 kg)

• Frequency Response- 20–200 Hz ±3 dB. Anechoic in LFE mode.
• Low Frequency Transducer 15"  (38.1cm) high-excursion, inverted surround, polypropylene cone in a cast aluminum basket with extended throw driver assembly; sealed non- resonant cabinet design.
• Sub Control App: iOS and Android
• Anthem Room Correction: iOS, Android, and PC
• Controls (Backplate)-Level: Min–Max Setting Control: Local, App Power Mode: On, Trigger, Auto
• Controls (via Bluetooth) Level: -40 to 12dB Low-Pass Filter (Frequency): 35–120Hz Low-Pass Filter (Order): Bypass, Third, Fourth Phase: 0–180° (1° Increments) Phase (Polarity): Normal, Inverted Preset Listening Modes: Music, Night, Movie 20–30Hz Level: ±10dB Anthem Room Correction (ARC): On, Off Tone Sweep (20–120Hz): On, Off, Pause (Frequency)
• Inputs (Audio)- SWT-X Receiver & Transmitter (sold separately)
• Inputs (Other)USB: Micro USB (for ARC/Firmware Update) Trigger: 3.5mm, 5–24 DC
• Amplifier-900 Watts (1,800 peak)
• Anthem Room Correction (ARC)
• Feet-Rubber, ETC (Energy Transfer Coupler) Spikes
• Impedance-RCA: 8,300 Ohms Speaker Level: 2,000 Ohms (red to black) XLR: 28,000 Ohms (pin 2 to 3)
• Power Draw-Typical: 125W, Max: 800W, Idle: 15W, Standby: 0.5W

• Dimensions (HxWxD),
• Front-Firing- 20.1" x 17.9" x 19.1" (51 cm x 45.4cm x 48.6cm)
• Dimensions (HxWxD), Down-Firing-20" x 17.9 " x 18.5 " (50.9 cm x 45.4cm x 47 cm)
• Finish-Satin Black
• Weight   57 lbs. (25.9 kg)

• SPECIFICATIONS
• Type AB CLASS POWER AMPLIFIER (Balanced or unbalanced version) Bias MANUAL Power 150W Bandwidth 20Hz to 50kHz @-3dB Sensibility 700mV Number of blocks 1
• Tubes list 12 X POWER TUBES (KT88/KT90/KT120) 4 X ECC83 2 X ECC82 Dimensions 49.5x56.5x21cm Weight 55kg Consumption 500W

• Plays all disc formats, including SACD, CD-A, CD-R and CD-RW
• Supports audio file formats including FLAC, WAV, AIFF, OGG, MP3, AAC and WMA
• USB input
• Superb 32-bit DAC built in
• Streaming through the music life app
• Total harmonic distortion + noise = 0.002%
• Analogue Audio Output Digital to Analogue Conversion ESS9038 32-bit/192kHz Delta-Sigma DAC Signal/Noise Ratio (Awtd) 118dB unbalanced, 122db balanced Harmonic Distortion (1kHz) <0.0008% Frequency response 10Hz – 20kHz ± 0.5dB Output Level (0dB) 2.2Vrms unbalanced, 4.5Vrms balanced Output Impedance 47Ω unbalanced, 600Ω balanced Minimum Recommended Load 5kΩ RMS Jitter < 20 psec
• Digital Inputs Supported sample rates Optical 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz Coaxial 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz Bit depth 16-bit – 32-bit
• Digital Interfaces USB USB 2.0 High Speed (480Mbps) Ethernet 10/100Mbps Wireless 802.11b/g/n
• General Mains voltage 110–240V, 50–60Hz Maximum power consumption 20W Dimensions (W x H x D) (including feet and control knob) 433x87x283mm Weight (net) 5.3kg Weight (gross) 7.3kg Supplied accessories Mains leads Remote control 2 x AAA batteries Wi-Fi Antenna