MSB | Jack-fi https://www.jack-fi.ro Thu, 12 Mar 2026 11:16:52 +0000 ro-RO hourly 1 https://wordpress.org/?v=4.6.29 MSB Optical/Coaxial Module and the Balanced XLR Module (AES/EBU) https://www.jack-fi.ro/produs/msb-opticalcoaxial-module-balanced-xlr-module-aesebu/ https://www.jack-fi.ro/produs/msb-opticalcoaxial-module-balanced-xlr-module-aesebu/#respond Wed, 14 Apr 2021 21:13:14 +0000 https://www.jack-fi.ro/?post_type=product&p=26731 These two modules are our S/PDIF interface modules. Around since the eighties, S/PDIF is the universal interface and is sent over optical, coaxial, or differential cabling. This interface is limited in both sample rate, supported data formats, and bit depth. Toslink, Coaxial, and Balanced digital interfaces are most commonly asynchronous unless a separate clock feedback channel is added to the transport or server. In all of our DACs, we provide the best isolation possible the format allows, helping prevent most electrical noise from coupling from the transport.

Manufactured in California

The post MSB Optical/Coaxial Module and the Balanced XLR Module (AES/EBU) appeared first on Jack-fi.

]]> MSB Optical/Coaxial Module and the Balanced XLR Module (AES/EBU)
  • Advantages:
    -Universal across the industry including consumer market
    -Toslink is 100% electrical isolated
    -Provides an isolated Word Sync output for clock feedback
  • Limitations:
    -Asynchronous (Unless Word Sync is used )
    -Isolation (except for Toslink) is limited
    -Medium to High jitter
    -No error detection or correction
    -Limited to 24/192kHz and 1xDSD via DoP
    -Limited to short cable lengths without performance degradation.

The post MSB Optical/Coaxial Module and the Balanced XLR Module (AES/EBU) appeared first on Jack-fi.

]]> https://www.jack-fi.ro/produs/msb-opticalcoaxial-module-balanced-xlr-module-aesebu/feed/ 0 MSB ProISL Interface https://www.jack-fi.ro/produs/msb-proisl-interface/ https://www.jack-fi.ro/produs/msb-proisl-interface/#respond Wed, 14 Apr 2021 21:26:13 +0000 https://www.jack-fi.ro/?post_type=product&p=26734 MSB ProISL Interface
This interface is the highest performance digital audio interface. The interface is glass fiber optic based, making it 100% electrically isolated and allowing for incredible cable lengths with no loss. The unique protocol allows a very low jitter copy of the DAC master clock to be fed back to the source,creating a low jitter clock synchronous with the audio data system. The audio data is encoded and sent to the DAC, where it’s checked for errors and corrected before playback. The ProISL is capable of multi-channel audio and extremely high sample rates (much higher than any current standard). Fiber is used because it allows the source and the DAC Any noise generated in the source (CPU, drive, video processing, ect…) can be prevented from entering the DAC and the rest of the audio system.

Manufactured in California

The post MSB ProISL Interface appeared first on Jack-fi.

]]> MSB ProISL Interface
  • Advantages:
    -Synchronous to the DAC
    -Offers 100% electrical isolation between source and DAC
    -Interface has strong error detection and correction
    -Virtually limitless, lossless cable lengths are supported (up to 1km)
    -Source device type and capabilities are reported to the DAC (ProUSB, Transport, Etc…)
    -Insensitive to ground and noise issues
    -Very low jitter
  • Limitations:
    -Offers no software control of the DAC from the source (Volume, etc…)

The post MSB ProISL Interface appeared first on Jack-fi.

]]> https://www.jack-fi.ro/produs/msb-proisl-interface/feed/ 0 MSB ProUSB Input https://www.jack-fi.ro/produs/msb-prousb-input/ https://www.jack-fi.ro/produs/msb-prousb-input/#respond Wed, 14 Apr 2021 21:43:03 +0000 https://www.jack-fi.ro/?post_type=product&p=26737 MSB ProUSB Input
The ProUSB solution is the ultimate solution for computer audio playback. It provides the ease of a USB interface in conjunction with 100% electrical isolation, long cable lengths, data protection and synchronous interface of the MSB ProISL. By using the ProISL interface, the source can be located physically far away from the system and a single fiber cable can connect to the DAC. The advantage of moving the source far away from the system is much lower electrical noise in your listening room.
Key features.
768kHz PCM Playback
8x DSD support*
Full MQA decoding*
100% Electrical isolation between the DAC and server/computer
Uses the audio clock from the DAC
Supports ProISL cable lengths up to 1km without any loss
Requires ProISL Input module in the DAC
Will only work with current DACs (Discrete, Premier, Reference, and Select)
*8x DSD and MQA support require firmware updates in the DAC

Multi-part solution.
The Pro USB is one part of a multi-part low noise USB solution. It converts the USB signal from your computer into MSB’s proven proprietary Pro ISL format. The full connection requires the following:
Roon Core / Server / Computer
Current generation MSB DAC
Pro ISL Input Module
Pro ISL cable
Pro USB

Manufactured in California

The post MSB ProUSB Input appeared first on Jack-fi.

]]> MSB ProUSB Input
  • Advantages:
    -Synchronous to the DAC
    -Offers 100% electrical isolation between source and DAC
    -Works with most music server and computer systems that support USB audio
    -Uses the ProISL interface with error correction and detection
    -Virtually limitless in cable lengths (up to 1km) between the USB module and the DAC
    -Works at rates up to 24/768kHz and 8xDSD (with a PC)
  • Limitations:
    -Offers no software control of the DAC from the source (Volume, etc…)

The post MSB ProUSB Input appeared first on Jack-fi.

]]> https://www.jack-fi.ro/produs/msb-prousb-input/feed/ 0 MSB Discrete Supply https://www.jack-fi.ro/produs/msb-discrete-supply/ https://www.jack-fi.ro/produs/msb-discrete-supply/#respond Wed, 14 Apr 2021 19:25:24 +0000 https://www.jack-fi.ro/?post_type=product&p=26695 Discrete Power Supply
Superior conversion begins with clean and stable low-noise power. The Discrete Power Supply feeds the DAC with dual low-noise power streams that are linear and independent. That’s not all—the CNC unibody aluminum chassis provides the discrete power supply with optimal thermal performance and an elegant design aesthetic. The DAC comes equipped with a single power supply, but can be augmented with a second discrete power supply to enable optimized power isolation between all major components.

Manufactured in California

The post MSB Discrete Supply appeared first on Jack-fi.

]]> MSB Discrete Supply
    Technical Specifications:
  • AC Voltage 100V (Fixed)
    120/240V (Auto switching)
  • Power Consumption 45 Watts with fully configured Premier DAC
    Chassis Dimensions
  • Width: 8.25 in (209.6 mm)
  • Depth: 6 in (152.4 mm)
  • Chassis Height (Without Feet): 2 in (50.8 mm)
  • Stack height: 2.65 in (67.3 mm)
  • Weight: 5.5 lbs (2.5 kg)
  • Product Feet: M6X1 Thread
      Shipping Dimensions
  • Width: 17 in (431.8 mm)
  • Depth: 11 in (279.4 mm)
  • Height: 5 in (127 mm)
  • Weight: 8 lbs (3.7 kg)
      Included Accessories
  • IEC power cord
    Dual-link power cable
    4X Rubber feet
    4X Plastic foot inserts

The post MSB Discrete Supply appeared first on Jack-fi.

]]> https://www.jack-fi.ro/produs/msb-discrete-supply/feed/ 0 MSB Discrete DAC https://www.jack-fi.ro/produs/msb-discrete-dac/ https://www.jack-fi.ro/produs/msb-discrete-dac/#respond Wed, 14 Apr 2021 19:09:16 +0000 https://www.jack-fi.ro/?post_type=product&p=26684 Refined sound. Elegant design
The Prime DAC Module
With two prime DACs, we yield an unprecedented level of detail, reproducing the musicality, soundstage, and texture of an original performance, bringing the artist to you. A fully balanced, ultra-high precision, discrete ladder DAC architecture ensures each note tells a story. Additionally, MSB’s robust in-house design enables the finest quality playback of PCM and native DSD, while our low impedance circuitry drives your amplification directly without adding coloration or buffering noise. The end result is a digital experience defying expectations.
A display for the listening chair
Equipped with high-visibility and a wide viewing angle, the display is both easy-to-read and stunning, exhibiting our love for intuitive features. The LED display, slaved to the audio clock, is refreshed between data processing to drastically reduce electrical interference. The in-house discrete design is then constructed into its own shielded CNC pocket for optimal isolation. Sit back and be immersed.
Integrated clock. Flexible Configurations
A modular I/O card keeps even the discrete DAC flexible, repairable, and upgradeable. Along with an integrated clock, changing this card allows switching between single-ended and balanced outputs.
Engaging with the future
MSB thrives off the innovation required to meet consumer demands. We’re constantly improving digital input modules to stay at the forefront of the high-end audio industry, ensuring you’re always equipped with the most current digital file formats and interfaces. Focusing on our network renderer and USB input, your audio tech will be on the cutting edge. Put simply, your DAC is ready for the future.
A better USB solution
The Pro USB was developed to offer a multi part USB solution that features complete electrical isolation and all the performance of MSB’s proprietary Pro ISL input. The Pro USB is offered as a stand alone module for users who already have an MSB DAC that is equipped with a Pro ISL input as well as a starter kit with a Pro ISL input and everything you need to get up and running.
– Complete electrical isolation
– Up to 32 bit – 768kHz
– MQA decoding
– Up to 8X DSD
– Up to 1km lossless transmission
Superior streaming
The MSB Renderer was developed using an in-house hardware design running an ultra low noise A5 processor for optimal audio playback performance. Over the air updates will ensure that your renderer always has the latest capabilities and ultimate convenience.
– Up to 32 bit – 768kHz
– MQA decoding
– Roon Endpoint
– Up to 4X DSD
– UPnP Protocol
– DLNA Protocol
Discrete Power Supply
Superior conversion begins with clean and stable low-noise power. The Discrete Power Supply feeds the DAC with dual low-noise power streams that are linear and independent. That’s not all—the CNC unibody aluminum chassis provides the discrete power supply with optimal thermal performance and an elegant design aesthetic. The DAC comes equipped with a single power supply, but can be augmented with a second discrete power supply to enable optimized power isolation between all major components.
Completely modular
Paired with performance increases, our modular design ethos increases flexibility for future updates and product support, guaranteeing a long-term product investment. As you pursue higher levels of playback, an MSB upgrade path is always available to help drive your own desire for innovation. Whether it’s a software update or a leading-edge modular component, we’re here to help the most valued aspect of MSB—our customers.
The MSB Remote
When we set out to make the MSB remote, the design was built from the ground up. Stainless steel buttons arrayed around an elegant volume wheel to optimize performance and response. California crafted in-house from an aluminum billet, the enclosure feels solid yet refined. Tailored for both the transport and the DAC’s daily use, our remote brings you closer to the music you love.

Manufactured in California

The post MSB Discrete DAC appeared first on Jack-fi.

]]> MSB Discrete DAC
    Technical Specifications:
  • Supported Formats (Input dependent) 44.1kHz to 3,072kHz PCM up to 32 bits
    1xDSD, 2xDSD, 4xDSD, 8xDSD
    Supports DSD via DoP on all inputs
  • Digital Inputs 1x RCA Coaxial
    1x XLR
    1x Word-Sync
    2x Toslink
    2x Advanced isolated input module slots
  • XLR Analog Outputs 3.57Vrms Maximum
    300Ω Balanced
    Galvanically isolated
  • Volume Control 1dB steps (Range 0 – 106).
    Volume Control can be disabled in the menu.
  • Display Discrete LED audio clock synchronous display
    Adjustable brightness and auto-off feature
  • Controls Isolated RS-232
    IR Remote
    Front panel interface
  • Power Consumption 35 Watts with fully configured Discrete DAC
      Chassis Dimensions
  • Width: 17 in (432 mm)
  • Depth: 12 in (305 mm)
  • Chassis Height (Without Feet): 2 in (51 mm)
  • Stack height: 2.65 in (68 mm)
  • Weight: 18 lbs (8.2 kg)
  • Product Feet: M6X1 Thread
      Shipping Dimensions
  • Width: 22 in (558.8 mm)
  • Depth: 18 in (457.2 mm)
  • Height: 7 in (177.8 mm)
  • Weight: 27 lbs (12.3 kg)
      Included Accessories
  • User Manual
    MSB Remote
    USB charging cable
    Dual-link power splitter
    4X Rubber feet
    4X Plastic foot inserts

The post MSB Discrete DAC appeared first on Jack-fi.

]]> https://www.jack-fi.ro/produs/msb-discrete-dac/feed/ 0 MSB Sistem (DAC + transport + Power Supply) https://www.jack-fi.ro/produs/msb-sistem-dac-transport-power-supply/ https://www.jack-fi.ro/produs/msb-sistem-dac-transport-power-supply/#respond Mon, 26 Jan 2026 15:11:57 +0000 https://www.jack-fi.ro/produs/msb-sistem-dac-transport-power-supply/ Pentru detalii privind aceste produse va rugam sa ne contactati telefonic: 0724065445!

MSB Sistem (DAC + transport + Power Supply)

MSB Universal Media transport UMT 5+

MSB Diamond Power Base V

MSB  Analog DAC cu volume control, USB module si I2S Pro Module.

Manufactured in California

The post MSB Sistem (DAC + transport + Power Supply) appeared first on Jack-fi.

]]> MSB Sistem (DAC + transport + Power Supply)

MSB Universal Media transport UMT 5+

MSB Diamond Power Base V

MSB  Analog DAC cu volume control, USB module si I2S Pro Module.

The post MSB Sistem (DAC + transport + Power Supply) appeared first on Jack-fi.

]]> https://www.jack-fi.ro/produs/msb-sistem-dac-transport-power-supply/feed/ 0 MSB Transport Powerbase https://www.jack-fi.ro/produs/msb-transport-powerbase/ https://www.jack-fi.ro/produs/msb-transport-powerbase/#respond Wed, 14 Apr 2021 18:00:08 +0000 https://www.jack-fi.ro/?post_type=product&p=26672 The Transport Powerbase
You can’t overstate the importance of a clean power supply. A reimagined design paired with the transport reduces the noise floor even further through specialized isolating transformers. We’ve equipped the transport with a single supply for the audio side of the transport, along with an isolated supply for the video side, yielding an unprecedented level of performance.

Manufactured in California

The post MSB Transport Powerbase appeared first on Jack-fi.

]]> MSB Transport Powerbase
    Technical Specifications:
  • AC Voltage 100V (Fixed)
    120/240V (Auto switching)
  • Power Consumption 50 Watts with standalone transport
    Less than 2W standby
    Chassis Dimensions
  • Width: 17.5 in (444 mm)
  • Depth: 17.5 in (444 mm)
  • Chassis Height (Without Feet): 2.2 in (56 mm)
  • Stack height: 2.85 in (72 mm)
  • Weight: 45 lbs (20 kg)
  • Product Feet: M6X1 Thread
    Shipping Dimensions
  • Width: 25 in (635 mm)
  • Depth: 25 in (625 mm)
  • Height: 10 in (254 mm)
  • Weight: 65 lbs (29 kg)
    Included Accessories
  • Grounding cable
    IEC power cord
    2X Dual-link power cable
    4X Rubber feet
    4X Plastic foot inserts

The post MSB Transport Powerbase appeared first on Jack-fi.

]]> https://www.jack-fi.ro/produs/msb-transport-powerbase/feed/ 0 MSB Reference Headphone Amplifier https://www.jack-fi.ro/produs/msb-reference-headphone-amplifier/ https://www.jack-fi.ro/produs/msb-reference-headphone-amplifier/#respond Wed, 14 Apr 2021 16:50:45 +0000 https://www.jack-fi.ro/?post_type=product&p=26651 The magic of ultra HiFi sound brought to dynamic headphones
Dynamically driven
Designed for dynamic headphones, the Reference Headphone Amp is a fully balanced amplifier. Boasting 139dB of dynamic range, the amp works in tandem with the Reference and Select DAC, allowing the music to come to life in vibrant and unforgettable new ways.
CNC billet chassis
Starting with a 65lb plate of raw aluminum, material is machined in our own in-house CNC shop. After more than four hours of machining, 60% of the aluminum is removed, resulting in a significantly lighter, more contoured product with the best anodized finishes on the market.
4-Pin XLR
Each amplifier is equipped with three 4-pin XLR outputs, designed for a shared listening experience.
Fully equipped
rear-facing headphone jack allows for a cleaner system aesthetic—there aren’t any dangling cables interfering with a cleanly assembled system. The noise floor is reduced with an isolated transformer and grounding scheme. 12 Volt triggers allow remote control over the system power.
Analog bypass
If you’re sharing the headphones with a two-channel system, use our internal bypass we’ve installed directly into the amp. Simply turn off the unit for the signal to be sent to your other system.
The 12V Trigger Adapter
The 12V trigger adapter provides a multitude of ways for connecting your MSB product with other 12V trigger systems.

Manufactured in California

The post MSB Reference Headphone Amplifier appeared first on Jack-fi.

]]> Reference Headphone Amplifier
    Technical Specifications

The Reference Headphone Amp can ONLY be used with MSB DACs.

  • Supported Formats Analog Only
  • XLR Analog Inputs Optimized for 75Ω or 150Ω Balanced Source
  • XLR Analog Outputs Direct connection to input when enabled or unit powered off.
    When listening to headphones, output is muted with 75Ω output impedance
  • Headphone Output Impedance 0.45Ω
  • Dynamic Range 20Hz-20kHz (Max Power at 45Ω)
    >139dB >141dBA
  • Frequency Response 5Hz-20kHz ±0.016dB
  • Common Mode Rejection Ratio > 95dB CMRR @ 60Hz
    > 95dB CMRR @ 1kHz
    > 80dB CMRR @ 20kHz
  • Crosstalk
  • SMPTE IMD 0dBu 0.0019% @ 45Ω
  • % THD+N 1kHz 0dBu 0.00065% @ 45Ω
  • Max Power @ 1% THD+N 16Ω @ 4.25Vrms (1.12W)
    32Ω @ 8.6Vrms (2.3W)
    45Ω @ 15.5Vrms (5.3W)
    150Ω @ 15.6Vrms (1.62W)
  • Noise Floor
    (150Ω Input Impedance) 0.00168mVrms
    20Hz-20kHz
  • Headphone Output Connectors 1x Rear 4 Pin XLR
    2x Front 4 Pin XLR
  • Display Power LED
  • Controls IR Remote (Configurable)
    Power Button (Configurable)
    2x MSB 12V Trigger
  • Power Consumption 64 Watts
    Less than 2W standby

      Topology
  • Input/Gain Stage – Class-A
    – Double balanced
    – Impedance matched
    – DC coupled
    – Fully discrete
  • Output Stage – Class-A
    – Balanced
    – Current gain only

      Chassis Dimensions
  • Width: 17.5 in (444 mm)
  • Depth: 17.5 in (444 mm)
  • Chassis Height (Without Feet): 2.2 in (79 mm)
  • Stack height: 2.85 in (92 mm)
  • Weight: 36 lbs (16 kg)
  • Product Feet: M6X1 Thread
      Shipping Dimensions
  • Width: 25 in (635 mm)
  • Depth: 25 in (625 mm)
  • Height: 10 in (254 mm)
  • Weight: 61 lbs (28 kg)
      Included Accessories
  • Ground cable
    IEC power cord
    4X Rubber feet
    4X Plastic foot inserts

The post MSB Reference Headphone Amplifier appeared first on Jack-fi.

]]> https://www.jack-fi.ro/produs/msb-reference-headphone-amplifier/feed/ 0 MSB Select Transport Powerbase https://www.jack-fi.ro/produs/msb-select-transport-powerbase/ https://www.jack-fi.ro/produs/msb-select-transport-powerbase/#respond Wed, 14 Apr 2021 18:53:01 +0000 https://www.jack-fi.ro/?post_type=product&p=26681 The Transport Powerbase
You can’t overstate the importance of a clean power supply. A reimagined design paired with the transport reduces the noise floor even further through specialized isolating transformers. We’ve equipped the transport with a single supply for the audio side of the transport, along with an isolated supply for the video side, yielding an unprecedented level of performance.

Manufactured in California

The post MSB Select Transport Powerbase appeared first on Jack-fi.

]]> MSB Select Transport Powerbase
    Technical Specifications:
  • AC Voltage 100V (Fixed)
    120/240V (Auto switching)
  • Power Consumption 50 Watts with standalone transport
    Less than 2W standby
  1. Chassis Dimensions
  • Width: 17.5 in (444 mm)
  • Depth: 17.5 in (444 mm)
  • Chassis Height (Without Feet): 3 in (79 mm)
  • Stack height: 3.625 in (92 mm)
  • Weight: 45 lbs (20 kg)
  • Product Feet: M6X1 Thread
    Shipping Dimensions
  • Width: 25 in (635 mm)
  • Depth: 25 in (625 mm)
  • Height: 10 in (254 mm)
  • Weight: 65 lbs (29 kg)
    Included Accessories
  • Grounding cable
    IEC power cord
    2X Dual-link power cable
    4X Rubber feet
    4X Plastic foot inserts

The post MSB Select Transport Powerbase appeared first on Jack-fi.

]]> https://www.jack-fi.ro/produs/msb-select-transport-powerbase/feed/ 0 MSB Reference Transport https://www.jack-fi.ro/produs/msb-reference-transport/ https://www.jack-fi.ro/produs/msb-reference-transport/#respond Wed, 14 Apr 2021 17:47:04 +0000 https://www.jack-fi.ro/?post_type=product&p=26666 Unparalleled sound in a versatile design.
High resolution audio
Immersive sound that needs to be heard to be believed. The Reference Transport supports multi-channel DSD, as well as 192kHz/24-bit PCM used in high-resolution lossless formats such as AIFF, ALAC, APE, FLAC, WAV. In addition, the Reference Transport supports the latest in surround formats, such as Dolby TrueHD, DTS-HD, Dolby Atmos and DTS:X.
Aluminum tray
Machined in-house from a solid billet of aluminum, our disc tray is robust and durable with a commanding visual aesthetic.
Diversified media support
All of your audio needs in one elegant design. The Reference Transport plays every standard optical disc format, such as 4K UHD Blu-ray, Blu-ray, Blu-ray 3D, DVD, DVD – Audio and CD. Connected USB hard disks and thumb drives are also supported, and have the ability to access content from DLNA servers and SMB shares over the local network.
Media-Support-2-300x268
Best connection possible
Our proprietary connection, the Pro ISL interface prioritizes the most efficient aspects of any digital interface, using an infrared laser diode to transmit over a single-mode fiber cable. This enables features like clock sync and error correction, all while obtaining perfect isolation and ensuring the lowest possible jitter.

Manufactured in California

The post MSB Reference Transport appeared first on Jack-fi.

]]> MSB Reference Transport
    Technical Specifications:
  • Disc Types* UHD Blu-ray, Blu-ray, Blu-ray 3D, DVD-Video, DVD-Audio, AVCHD, SACD, CD, Kodak Picture CD, CD-R/RW, DVD±R/RW, DVD±R DL, BD-R/RE
  • BD Profile BD-ROM Version 3.1 Profile 6 (also compatible with BD-ROM Version 2.5 Profile 5)
  • Output Primary Outputs – Up to 8ch 192kHz PCM, DSD Support
    ”Surround Only” Outputs – Coaxial/Optical Audio: up to 2ch / 192kHz PCM, Dolby – Digital, DTS.
    HDMI Audio: up to 7.1ch / 192kHz PCM, up to 5.1ch DSD, Bitstream.
    HDMI Video: UHD / 1080p24 / 1080p / 1080i / 720p / 576p / 576i / 480p / 480i, 3D frame-packing 720p / 1080p24.
  • Controls Isolated RS-232
    IR Remote
    7 Buttons

      Chassis Dimensions
  • Width: 17.5 in (444 mm)
  • Depth: 17.5 in (444 mm)
  • Chassis Height (Without Feet): 2.2 in (79 mm)
  • Stack height: 2.85 in (92 mm)
  • Weight: 28 lbs (12.7 kg)
  • Product Feet: M6X1 Thread
      Shipping Dimensions
  • Width: 25 in (635 mm)
  • Depth: 25 in (625 mm)
  • Height: 10 in (254 mm)
  • Weight: 50 lbs (22.7 kg)
      Included Accessories
  • User manual
    Remote control
    HDMI cable
    Desktop Supply (Unless Transport Supply Upgraded)
    IEC power cord
    4X Rubber feet
    4X Plastic foot inserts

The post MSB Reference Transport appeared first on Jack-fi.

]]> https://www.jack-fi.ro/produs/msb-reference-transport/feed/ 0