VTL | Jack-fi https://www.jack-fi.ro Thu, 12 Mar 2026 11:16:52 +0000 ro-RO hourly 1 https://wordpress.org/?v=4.6.29 VTL TP-6.5 Signature Phono Stage https://www.jack-fi.ro/produs/vtl-tp-6-5-signature-phono-stage/ https://www.jack-fi.ro/produs/vtl-tp-6-5-signature-phono-stage/#respond Tue, 17 Jul 2012 11:38:29 +0000 http://www.jack-fi.ro/?post_type=product&p=3826 The new TP-6.5 Signature Phono Stage is designed to complement and match the TL-6.5 and TL7.5 Linestage Preamplifiers in sonic performance, user interface and cosmetics. This all-new product was designed from the ground up to redefine the current state of the art in standalone MC step ups and to stand as a reference phono stage worthy of the top VTL linestage preamplifiers, the TL7.5 Series II and TL-6.5.

The post VTL TP-6.5 Signature Phono Stage appeared first on Jack-fi.

]]> Tube Complement 2 x 12AU7 MC (MC Stage)
2 x 12AX7
2 x 12AT7MM
2 x 12AT7 Inputs 2 pairs single-ended/RCA Outputs 1 pair balanced out XLR out
1 pair single-ended RCA out Remote control functions Power
MC/MM Source Select
Gain up/down
Mute
Rumble
Load
Mono
Phase Maximum Gain MC: 62dB single ended, 68dB balanced
MM: 35 dB single ended, 40 dB balanced Output Impedance 150 Ohms Input Impedance (Cartridge Load) Selectable MC:
100, 250, 470, 1K, 2.5K, 4.7K, 47K Ohms, User DefinedSelectable MM:
10K, 22K, 47K, User Defined Frequency response
+0-1 dB 1 Hz – 100KHz Maximum Output Voltage < 1% THD 10 VRMS @ 1KHz (10K ohm load) Channel Separation > 70 dB @ 1KHz (>65 dB @ 20kHz) Power Consumption 80 Watts Weight 50 lbs (22.72 Kg) Fully packed in one box Weight 55 lbs (40Kg) Fully packed

The post VTL TP-6.5 Signature Phono Stage appeared first on Jack-fi.

]]> https://www.jack-fi.ro/produs/vtl-tp-6-5-signature-phono-stage/feed/ 0 VTL TL-2.5 Performance Linestage https://www.jack-fi.ro/produs/vtl-tl-2-5-performance-linestage/ https://www.jack-fi.ro/produs/vtl-tl-2-5-performance-linestage/#respond Fri, 13 Jul 2012 14:16:39 +0000 http://www.jack-fi.ro/?post_type=product&p=3792 The TL-2.5 all tube line stage preamplifier is designed for performance -- giving you music that is direct from the source, in the most realistic, colorless and truthful way we know how. This preamp is packed with features to give you the maximum control over all the audio and video sources in your system. With 6 line inputs, an optional internally retro-fittable phono stage, two pairs of outputs, a tape loop, and external processor loop (for home theater), you can rest assured that this preamp will plug and play into your existing system in no time at all. Remote volume control and mute comes standard.

The post VTL TL-2.5 Performance Linestage appeared first on Jack-fi.

]]>
  • Vacuum Tube Complement – 2 x 12AU7, 2 x 12AT7
  • Inputs – 6 Single ended Line inputs2 RCA Processor / Tape in
  • Outputs – 2 pairs Single-ended RCA2 pairs Processor / Tape Out
  • Remote Control Functions – Volume and Mute
  • Gain – 20 dB
  • Output Impedance – 200 Ohms
  • Input Impedance – 20K Ohms
  • Frequency response+ 0 – 3 dB: 1 Hz – 60KHz
  • Maximum Output Voltage < 1% THD: 60 Volts
  • Channel Separation: > 75 dB @ 1KHz
  • Power Consumption – 100 Watts
  • Dimensions (W x D H) – 19 x 14 x 3.75 inches48.25 x 35.5 x 9.5 cm
  • Weight – 25 lbs (11Kg) Fully packed

The post VTL TL-2.5 Performance Linestage appeared first on Jack-fi.

]]> https://www.jack-fi.ro/produs/vtl-tl-2-5-performance-linestage/feed/ 0 VTL TL-2.5 Performance Preamplifier https://www.jack-fi.ro/produs/vtl-tl-2-5-performance-preamplifier/ https://www.jack-fi.ro/produs/vtl-tl-2-5-performance-preamplifier/#respond Fri, 13 Jul 2012 14:33:20 +0000 http://www.jack-fi.ro/?post_type=product&p=3794 The award winning VTL TL-2.5 preamp is a sturdily built unit, with quality parts, and will take your breath away with its clear, upfront sound.

The post VTL TL-2.5 Performance Preamplifier appeared first on Jack-fi.

]]> • Tube Complement 1 x 12AX7 (MC Stage)
2 x 12AX7 (MM RIAA Stage)
1 x 12AT7 (Output Stage) • MM Gain 45 dB • MC Gain 60 dB • MM Input Impedance 47K Ohms • MC Input IMpedance 150 Ohms • Output Impedance 400 Ohms • Max Output Voltage 20V • Dimensions: W = 19” (40cm)
D = 12” (30cm)
H = 3” (18cm)

The post VTL TL-2.5 Performance Preamplifier appeared first on Jack-fi.

]]> https://www.jack-fi.ro/produs/vtl-tl-2-5-performance-preamplifier/feed/ 0 VTL TP-2.5 Performance Phono Stage https://www.jack-fi.ro/produs/vtl-tp-2-5-performance-phono-stage/ https://www.jack-fi.ro/produs/vtl-tp-2-5-performance-phono-stage/#respond Fri, 13 Jul 2012 15:08:31 +0000 http://www.jack-fi.ro/?post_type=product&p=3800 The VTL TP-2.5 Performance Series is the companies best value for dollar Phono Stage solution. The all important tube component of this line stage comprises of four 12AX7 vacuum tubes that are run by a fully regulated power supply with extensive AC mains filtering. To back this up the design has an over size power transformer with an array high spec capacitors controlling the audio signal circuits.

The post VTL TP-2.5 Performance Phono Stage appeared first on Jack-fi.

]]> Tube Complement 1 x 12AX7 (MC Stage)
2 x 12AX7 (MM RIAA Stage)
1 x 12AT7 (Output Stage) MM Gain 45 dB MC Gain 60 dB MM Input Impedance 47K Ohms MC Input IMpedance 150 Ohms Output Impedance 400 Ohms Max Output Voltage 20V Dimensions: W = 19” (40cm)
D = 12” (30cm)
H = 3” (18cm)

The post VTL TP-2.5 Performance Phono Stage appeared first on Jack-fi.

]]> https://www.jack-fi.ro/produs/vtl-tp-2-5-performance-phono-stage/feed/ 0 VTL ST-85 Performance Stereo Amplifier https://www.jack-fi.ro/produs/vtl-st-85-performance-stereo-amplifier/ https://www.jack-fi.ro/produs/vtl-st-85-performance-stereo-amplifier/#comments Fri, 13 Jul 2012 15:24:19 +0000 http://www.jack-fi.ro/?post_type=product&p=3805 We proudly offer a VTL amplifier for slightly under $3000 (suggested US retail price). Still offering a full measure of the "VTL sound," but at a real world price. Using the classic workhorse tube that was the foundation of the VTL sound, the EL34 models are studies in compact chassis with short signal paths. These rugged amplifiers are capable of delivering an exceptionally large sweet sound space from any satellite, mini-monitor or small floor-standing system. Listen to what one critic called "the weight of the brass, especially the trombones, is sensational", and "... made me aware of just how good these units are at portraying those subtleties in music reproduction that matter to audiophile music lovers." We accomplished this seemingly contradictory goal through careful engineering... An audiophile "best buy."

The post VTL ST-85 Performance Stereo Amplifier appeared first on Jack-fi.

]]>
  • Vacuum Tube Complement – 4 x EL34, 4 x 12AT7
  • Output Power 20 Hz – 20 kHz into 5 Ohm load
  • Tetrode = 60 watts
  • Triode = 30 watts
  • THD 20 Hz – 20 kHz @ 60 W
  • THD 20 Hz – 20 kHz @ 30 W
  • < 3%
  • Class of output operation – AB1
  • Input Sensitivity @ 60 W – 0.680 V
  • Input Impedance – 100K Ohms
  • Optimum Load Range: 2 – 8 Ohms
  • S/N Ratio @ 60 W: – 195dB, 120Hz
  • Power Consumption
  • Idle = 140 W
  • Full Power = 500 W
  • Primary Main Fuse Rating
  • 110/120V = 6A Ceramic Slo Blo
  • 220/240V = 3A Ceramic Slo Blo
  • B+ Fuse Rating – 0.5A fast acting ceramic
  • Dimensions W x D x H
  • 16 x 12 x 7 inches
  • 40 x 30 x 18 cm
  • Weight per unit – 45 lbs (20.5 Kg) Unpacked, 55 lbs (25 Kg) Packed

The post VTL ST-85 Performance Stereo Amplifier appeared first on Jack-fi.

]]> https://www.jack-fi.ro/produs/vtl-st-85-performance-stereo-amplifier/feed/ 1 VTL MB-125 Performance Monoblock https://www.jack-fi.ro/produs/vtl-mb-125-performance-monoblock/ https://www.jack-fi.ro/produs/vtl-mb-125-performance-monoblock/#comments Fri, 13 Jul 2012 15:38:21 +0000 http://www.jack-fi.ro/?post_type=product&p=3808 Years of refinement have produced an amplifier of unparalleled clarity and music at its price. These space efficient monoblocks, sold in single monoblocks or in pairs, are an excellent choice for the two-channel as well as home theater systems. Easily drives all but the most inefficient loudspeakers. One listen, and you'll understand why this is the most favorably reviewed amplifier ever made.

The post VTL MB-125 Performance Monoblock appeared first on Jack-fi.

]]>
  • Vacuum Tube Complement – 4 x EL34, 2 x 12AT7
  • Output Power 20 Hz – 25 kHz ± 0.1dB < 3% THD
    (Stable to 2W) – into 4WTetrode = 130 wattsTriode = 65 wattsinto 8WTetrode = 100 wattsTriode = 55 watts
  • Small signal frequency response(< 0.2% THD @ 1W) – 1 – 75 kHz -3dB
  • Class of output operation – AB1
  • Inputs / Outputs – Single-ended RCA /1 pair 5 way binding posts
  • Input Sensitivity / Impedance – 0.75 V / 145KW
  • Output Impedance – 1.6W
  • Power Consumption – Idle = 180WFull Power = 575W
  • Dimensions W x D x H – 15.75 x 12.5 x 7 inches 40 x 31.75 x 17.75 cm
  • Weight per unit – 45 lbs (20.5 Kg) fully packed

The post VTL MB-125 Performance Monoblock appeared first on Jack-fi.

]]> https://www.jack-fi.ro/produs/vtl-mb-125-performance-monoblock/feed/ 2 VTL ST-150 Performance Stereo Amplifier https://www.jack-fi.ro/produs/vtl-st-150-performance-stereo-amplifier/ https://www.jack-fi.ro/produs/vtl-st-150-performance-stereo-amplifier/#comments Fri, 13 Jul 2012 15:53:11 +0000 http://www.jack-fi.ro/?post_type=product&p=3811 Over 150 watts per channel (300 watts of stereo power), this stereo amplifier offers superb musical clarity and plenty of power in one compact chassis. Utilizing the finest quality parts, and entirely hand built by experienced craftsmen, the ST-150 represents our pinnacle in stereo amplifier design. The noted VTL quick clean musical sound and exceptional bass punch is delivered here by the 6550C tubes. Exceptionally well suited to triode operation, yet they are also very quick and clean in tetrode mode, these VTL amplifiers are well-suited to smaller electrostatic panels and dynamic speakers not requiring high current. For commanding performances on the midrange and clarity on the top, VTL wins hands down. In triode mode, the amps are best suited to speakers with an efficiency of 92dB/1W/1m or higher. Try these designs as a great sounding alternative to single-ended triode designs.

The post VTL ST-150 Performance Stereo Amplifier appeared first on Jack-fi.

]]> Vacuum Tube Complement 8 x 6550C, 2 x 12BH7, 2 x 12AT7 Output Power
20 Hz – 25 kHz ± 0.1dB < 3% THD
(Stable to 2 Ohms) into 4 OhmsTetrode = 175 Watts
Triode = 90 Wattsinto 8 OhmsTetrode = 140 Watts
Triode = 75 Watts Small signal frequency response
(< 0.2% THD @ 1W) 1 – 75 kHz -3dB Class of output operation AB1 Inputs / Outputs Single-ended RCA /
1 pair 5 way binding posts Input Sensitivity / Impedance 1.0 V / 100K Ohms Output Impedance 1.65 Ohms Power Consumption Idle = 280W
Full Power = 950W Primary Main Fuse Rating 110/120V = 15A Ceramic Slo Blo
220/240V = 8A Ceramic Slo Blo B+ Fuse Rating 1A fast acting ceramic 600V Dimensions W x D x H 19 x 13.25 x 8.75 inches
48.25 x 33.5 x 22.25 cm Weight per unit 95 lbs (43 Kg) fully packed

The post VTL ST-150 Performance Stereo Amplifier appeared first on Jack-fi.

]]> https://www.jack-fi.ro/produs/vtl-st-150-performance-stereo-amplifier/feed/ 1 VTL TL-5.5 Series II Signature Line Preamplifier https://www.jack-fi.ro/produs/vtl-tl-5-5-series-ii-signature-line-preamplifier/ https://www.jack-fi.ro/produs/vtl-tl-5-5-series-ii-signature-line-preamplifier/#respond Fri, 13 Jul 2012 16:44:39 +0000 http://www.jack-fi.ro/?post_type=product&p=3814 Since its introduction in 1997, the TL-5.5 has earned a reputation for outstanding performance at an economical price. Now, VTL has significantly upgraded this preamp, using many of the technological innovations derived from the flagship TL-7.5 preamplifier. The result is a modern full-featured preamplifier that outperforms in every way, making it one of the top values of any tube preamplifier in its category.

The post VTL TL-5.5 Series II Signature Line Preamplifier appeared first on Jack-fi.

]]> Vacuum Tube Complement: 2 x 12AU7, 4 x 12AT7 (line stage)
2 x 12X7, 2 x 12AX7 (Phono MM), 2 x 12AU7 (Phono MC) Inputs: 2 pair balanced/XLR or RCA single-ended
6 pairs single-ended/RCA Outputs: 1 pair balanced out
1 pair single-ended RCA out
1 pair single-ended RCA buffered Record Out Remote control functions: Power
Source Select
Volume up/down
Mute
Fade
Balance Control
Phase Reverse Gain Normal Gain –11 dB single ended, 17dB balanced
Switchable to Low Gain – 6 dB SE,11 dB balanced
Phono MM – 40dB
Phono MC — Selectable 54dB, 60dB, 66dB Output Impedance: 150 Ohms (Max400 ohms at 10Hz) Input Impedance : 35K Ohms Frequency response
+ 0 – 1 dB: 1 Hz – 200 KHz + 0 – 1dB Maximum Output Voltage < 1% THD: 30 Volts 10Hz – 200kHz, 1.75V into 600 ohms at 1%THD Channel Separation: > 100 dB @ 1KHz (>80 dB @ 20kHz) Power Consumption: 60 Watts (Line Stage)
130 Watts (with Phono stage) Weight and Dimensions: 40 lbs (18.12 Kg) Fully packed in one box
Unpacked weight: 30 lbs (13.6 Kg)

The post VTL TL-5.5 Series II Signature Line Preamplifier appeared first on Jack-fi.

]]> https://www.jack-fi.ro/produs/vtl-tl-5-5-series-ii-signature-line-preamplifier/feed/ 0 VTL TL-6.5 Signature Line Preamplifier https://www.jack-fi.ro/produs/vtl-tl-6-5-signature-line-preamplifier/ https://www.jack-fi.ro/produs/vtl-tl-6-5-signature-line-preamplifier/#respond Tue, 17 Jul 2012 11:58:54 +0000 http://www.jack-fi.ro/?post_type=product&p=3833 With the new TL6.5 Signature Preamplifier, true top-tier sound has just become a lot more affordable. All of the advanced technology inside the TL6.5 descends from the double-chassis TL7.5, VTL’s renowned Reference Preamplifier that many critics view as unsurpassed in sonic realism. By scaling the technology down to a single-chassis unit, VTL engineers have found a way to achieve the astonishing sound quality and functionality of the TL7.5 in a compact package costing significantly less.

The post VTL TL-6.5 Signature Line Preamplifier appeared first on Jack-fi.

]]> Vacuum Tube Complement: 2 x 12AU7 Inputs: 3 pairs balanced/XLR or RCA single-ended
5 pairs single-ended/RCA Outputs: 1 pair balanced out
2 pairs single-ended RCA out
2 pairs single-ended RCA buffered Tape Out  Remote control functions: Power
Source Select
Volume up/down
Mute
Fade
Balance Control
Phase Reverse Gain 14 dB single ended, 20dB balanced Output Impedance: 30 Ohms (Max 200 ohms at 10Hz) Input Impedance : 50K Ohms (20k ohms min) Frequency response
+0-1 dB: 1 Hz – 100KHz (20Hz – 100kHz +0–1dB into 600 ohms with 900pf 20’ interconnect cable) Maximum Output Voltage < 1% THD: 31 Volts 10Hz – 200kHz into 600 ohms at 1%THD Channel Separation: > 100 dB @ 1KHz (>80 dB @ 20kHz) THD+N Less than 0.05% at 10V out Rise and fall times 3µsecs Noise floor Better than –100dB un-weighted Power Consumption: 50 Watts  Dimensions (W x D X H):  17.5 x 17.5 x 6 inches
44.5 x 44.5 x 15.3 cm Weight: 55 lbs (40Kg) Fully packed 

The post VTL TL-6.5 Signature Line Preamplifier appeared first on Jack-fi.

]]> https://www.jack-fi.ro/produs/vtl-tl-6-5-signature-line-preamplifier/feed/ 0 VTL MB-185 Signature Series II https://www.jack-fi.ro/produs/vtl-mb-185-signature-series-ii/ https://www.jack-fi.ro/produs/vtl-mb-185-signature-series-ii/#respond Tue, 17 Jul 2012 12:46:41 +0000 http://www.jack-fi.ro/?post_type=product&p=3838 The MB-185 Series II Signature monoblock delivers superior performance at an affordable price. It offers the same technological improvements and cosmetic refurbishment as its bigger brother, the MB 450 Series II, although in this case using six 6550C tubes and a more compact output transformer to make 220 watts per channel. The extensive updates to the Series II amplifier include a revised power supply, SmartTube technology with automatic bias adjustment and fault sensing, and upgraded electronic components. The result is an amplifier with improved dynamics as well as superior speed and transparency at the top end. With its extraordinary agility, the MB-185 Series II is ideally suited for use with planar or electrostatic speakers as well as dynamic speakers with 10-inch or smaller drivers.

The post VTL MB-185 Signature Series II appeared first on Jack-fi.

]]>
  • Vacuum Tube Complement – 6 x 6550C, 1 x 12AT7, 1x 12BH7
  • Output Power 20 Hz – 20 kHz into 5 ohm load
  • Tetrode = 220W
  • Triode = 110W
  • THD 20Hz – 20kHz @ 220W Tetrode
  • THD 20Hz – 20kHz @ 110W Triode
  • <2.5%
  • Input Sensitivity @ 220W Tetrode – 2.0V
  • Input Impedance – 42K Ohms
  • Optimum Load Range: 4 – 8 Ohms
  • S/N Ratio @ 220W Tetrode
  • S/N Ratio @ 110W Triode
  • -110dB, 120Hz
  • Power Consumption
  • Idle = 230W
  • Full Power =900W
  • Primary Main Fuse Rating
  • 110/120V = 12A Ceramic Slo Blo
  • 220/240V = 6A Ceramic Slo Blo
  • Input Fuse
  • 110/120V = 1A Ceramic Slo Blo
  • 220/240V = 1A Ceramic Slo Blo
  • Logic Fuse
  • 110/120V = 1A Ceramic Slo Blo
  • 220/240V = 1A Ceramic Slo Blo
  • B+ Fuse Rating
  • Plate Fuse – 1.5A Fast Acting 600V
  • Screen Fuse – 0.75A Fast Acting 600V
  • Dimensions
  • W = 18.5 Inches (47 cm)
  • H = 9 Inches (23 cm)
  • D = 18 Inches (46 cm)
  • Weight
  • 93 lbs (42 Kg) unpacked
  • 110 lbs (50 Kg) packed

The post VTL MB-185 Signature Series II appeared first on Jack-fi.

]]> https://www.jack-fi.ro/produs/vtl-mb-185-signature-series-ii/feed/ 0