Telefon: 0724.065.445

IMPORTATOR EXCLUSIV arcam-sa10-ampli-stereo-graphite
ArcamSA10arcam_sa10_cds501_creative_20019066_arcam-sa10-amplifier

Arcam HDA SA10

4160 lei / bucata

Garantie 24 luni

* Preţul conţine TVA şi taxa timbru verde

The design of the HDA range draws upon all of Arcam’s experience as one of the UK’s most respected audio companies, to produce Arcam’s best performing range of audio products yet – using the best quality components and engineering practices, the HDA range is designed and built to give you years of listening enjoyment.

SA10
In any amplifier, the signal path is at the mercy of anything that creates noise within the unit. Thus, we spare no expense in using only the most high-quality components, even if it means the cost of our power supplies overtaking that of everything else.

The result, of course, is worth every penny.
A singer’s sharp intake of breath before hitting the chorus, a guitarist’s fingers sliding against the strings – it’s those seemingly minor details that can bring music to life. Fish out one of your all-time favourite albums and play it through a Bluetooth speaker, and guess what? Its sounds like a Bluetooth speaker. Play it through the SA10, and it’s as close to hearing the artist’s performance as you’re likely to get. There’s always joy in digging out an old recording you haven’t heard in years. With the HDA range, it’ll feel like hearing it forthe first time.

Selectie filtru digital – vezi detalii aici!

Product Description

 

  • Extremely efficient class A/B amplification
  • 50W of power per channel
  • 5 analogue inputs including phono
  • 3 digital inputs
  • 32-bit DAC,Sabre ESS9016K2M
  • Full I/P control
  • Total harmonic distortion + noise = 0.003%
  • Continuous power output (20Hz—20kHz at 0.5% THD), per channel
    Both channels, 8Ω, 20Hz—20kHz 50W
    Single channel, 4Ω, at 1kHz 90W
    Harmonic distortion, 80% power, 8Ω at 1kHz 0.003%
  • Analogue Inputs
    Phono (MM) cartridge:
    Input sensitivity at 1kHz 5mV
    Input impedance 47kΩ + 100pF
    Frequency response (ref. RIAA curve) 20Hz – 20kHz ± 1dB
    Signal/Noise ratio (A-wtd) 50W, ref. 5mV input 80dB
    Overload margin, ref. 5mV at 1kHz 21dB
    Line Inputs:
    Nominal sensitivity 1V
    Input impedance 10kΩ
    Maximum input 6Vrms
    Frequency response 20Hz – 20kHz ± 0.2dB
    Signal/Noise ratio (A-wtd) 50W, ref. 1V input 106dB
  • Digital Inputs
    DAC ESS9016K2M
    Frequency response 20Hz – 20kHz ± 0.05dB
    Total harmonics distortion + Noise 0.0007%
    Signal/Noise ratio (A-wtd) 115dB
    Supported sample rates Optical 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz
    Coaxial 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
    Bit depth 16-bit – 24-bit
  • Pre-amplifier output
    Nominal output level 630mV
    Output impedance 230Ω
  • Headphone output
    Maximum output level into 600Ω 5Vrms
    Output impedance 1Ω
    Load range 16Ω – 2kΩ
  • General
    Mains voltage 110–120V or 220–240V, 50–60Hz
    Maximum power consumption 350W
    Dimensions W x H x D (including feet, control
    knob and speaker terminals)
    433x87x310mm
    Weight (net) 8.4kg
    Weight (gross) 10.7kg
    Supplied accessories Mains leads
    Remote control
    2 x AAA batteries

Reviews

There are no reviews yet, would you like to submit yours?

Be the first to review “Arcam HDA SA10”

*

There are no products
Wishlist 0
Continue Shopping