JM-Reynaud Bliss Jubile

The BLISS Jubilee takes up the concept inaugurated by the BLISS Silver which was first in its time to benefit from a strict and rigorous pairing of all its components. This technique aims to obtain a perfect similarity of electrical and mechanical performance of the pair of speakers for a perfectly harmonious musical result.
In many respects, the BLISS Jubilee is based on an entirely new development. We find the stylistic codes of the Jubilee range with wide fillets on the rear horizontal edges as well as rounded front edges to minimize border effects. Thanks to the use of the golden ratio, the proportions of her cabinetmaking are more harmonious. She is from the start much more attractive.
Technically sophisticated, the new Bliss is equipped with the drivers of the EUTERPE Jubilee: the new 17cm woofer and the excellent impregnated silk dome tweeter using a 28mm voice coil.
Free from any coloring or “box sound,” the new Bliss offers an extremely lively and embodied sound and a beautiful brightness that is entirely free of projection effects or harshness. The sound image is wide, deep and stable: proof of careful and rigorous phase setting.
The axial fixation by pressure of its woofer makes it possible to relate the mechanical reference of the mobile equipment to the back of the enclosure. This principle significantly improves the impulse response of the system. The middle register is more open, more articulate and clearer of all the artifacts related to the coupling of the woofer with the front baffle of the cabinet.
Its 12db / octave crossover network is handcrafted using our best components:
– Silver-plated capacitors with identified direction of winding, they are specifically manufactured for JMR and use JMR HP 1132 silver / copper cable terminations.
– Air coil with very low resistance using a 1mm section pure deoxygenated copper cable.
– Non-inductive wound resistors.
– Internal connections made entirely with our silver / copper cable JMR HP 1132 .
-“In the air” wiring (components directly welded to each other without the use of a printed circuit to minimize insertion losses) hand-assembled on an anti-resonant support.
All components are measured, sorted and matched within a tolerance of 1% to achieve perfectly identical performance. From then on, the sound image and the tones are perfectly coherent and the setting in optimum phase.
To optimize its performance in terms of bandwidth and sound image, it should be associated with the Magic Stand II . The long hours of listening necessary for its optimization and thus validate its development were carried out on these supports.
The BLISS Jubilee will delight music lovers keen to sound that is truthful without coloring or ostentation, and who are looking for frank dynamic, highly nuanced, sophisticated, and varied tones.
This new BLISS is very easy to drive thanks to a very regular impedance curve that never falls below 4 Ohms. Do not hesitate to associate Bliss Jubilee with high quality electronics to obtain musical performances quite “jubilant”. They will then easily feed the listening room with a “large sound” that is well architected, very homogeneous and provided with a nice density.